Overwatch 2 refreshed the original with an engine update focused on larger maps and better lighting, while maintaining excellent optimization. The shift to a 5v5 format slightly reduced the visual clutter, helping with frame rate stability. NVIDIA Reflex is essential for reducing latency, supported on GTX 900 series and up. While minimum specs are low, competitive play at 144Hz+ requires a reasonably modern CPU (Intel Skylake / Ryzen Zen 1 or newer) to handle the fast-paced physics and game state updates.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 59 to 88 FPS depending on quality settings. At 1440p, frame rates range from 54 to 88 FPS. At 4K, frame rates range from 25 to 71 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Overwatch 2. The A10-7870K is 61% below recommended, but 114% above minimum.
The A10-7870K sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the A10-7870K sets the ceiling at about 88 FPS, while the GeForce RTX 4090 could reach 684 FPS. In this scenario, the CPU limits the GPU potential by 87% (FPS gap: 596 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your A10-7870K is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 87% | CPU Limits GPU 85% | CPU Limits GPU 82% | CPU Limits GPU 87% |
| 1440p (2K QHD) | CPU Limits GPU 84% | CPU Limits GPU 82% | CPU Limits GPU 78% | CPU Limits GPU 85% |
| 4K (Ultra HD) | CPU Limits GPU 77% | CPU Limits GPU 79% | CPU Limits GPU 80% | CPU Limits GPU 86% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU67% - 73% <> GPU42% - 66% <> | CPU65% - 70% <> GPU47% - 69% <> | CPU65% - 70% <> GPU47% - 69% <> | CPU59% - 73% <> GPU55% - 79% <> |
| 1440p (2K QHD) | CPU70% - 74% <> GPU43% - 68% <> | CPU69% - 70% <> GPU48% - 71% <> | CPU69% - 70% <> GPU48% - 71% <> | CPU61% - 73% <> GPU55% - 81% <> |
| 4K (Ultra HD) | CPU70% - 80% <> GPU43% - 68% <> | CPU69% - 77% <> GPU47% - 72% <> | CPU69% - 77% <> GPU47% - 72% <> | CPU62% - 80% <> GPU56% - 81% <> |
The A10-7870K + GeForce RTX 4090 pairing runs this title with CPU utilization between 59% and 80% and GPU utilization between 42% and 81%. A10-7870K stays in a controlled operating range, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 59% at 1080p to 61% at 4K, while CPU averages move from 68% to 73%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 68% average at its highest-load preset, while the A10-7870K peaks at 75% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 68% and GPU 59%. At 1440p, that shifts to CPU 70% and GPU 61%, and at 4K it reaches CPU 73% and GPU 61%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1440p (2K QHD) Ultra is the most balanced preset based on this dataset. It runs around CPU 67% (61-73%) and GPU 68% (55-81%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while A10-7870K remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the A10-7870K and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 61% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-61%vsrecommended
+279%vsrecommended
+114%vsminimum
+1907%vsminimum
The A10-7870K and GeForce RTX 4090 will struggle to run Overwatch 2 at smooth framerates. At 1080p Ultra, you can expect around 59 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Overwatch 2, upgrading the CPU would have the biggest impact on performance. The A10-7870K is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Overwatch 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Overwatch 2 requires at minimum a Core i3-560 (CPU) and GeForce GTX 600 series (GPU) with 6 GB RAM and 50 GB storage. For the recommended experience, you need a Core i7-4770 and GeForce GTX 1060 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Overwatch 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
