An asymmetrical horror game locked at 60 FPS. It is generally GPU-limited at high settings but runs on most mid-range hardware.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 60 FPS. At 1440p, frame rates range from 48 to 59 FPS. At 4K, frame rates range from 38 to 47 FPS.
The GeForce RTX 5090 is 708% above the recommended GPU (GeForce GTX 760) for Dead by Daylight. The A10-9700 is 46% below minimum CPU requirement.
The A10-9700 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 5090 still has headroom.
Approximated average price on current market:
Combo price: $2740. At 1080p Ultra, this combo delivers 60 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.032 fps/$ | 0.030 fps/$ | 0.024 fps/$ | 0.022 fps/$ |
| 1440p | 0.022 fps/$ | 0.020 fps/$ | 0.019 fps/$ | 0.018 fps/$ |
| 4k | 0.017 fps/$ | 0.016 fps/$ | 0.015 fps/$ | 0.014 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the A10-9700 sets the ceiling at about 89 FPS, while the GeForce RTX 5090 could reach 334 FPS. In this scenario, the CPU limits the GPU potential by 73% (FPS gap: 245 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your A10-9700 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 5090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 73% | CPU Limits GPU 73% | CPU Limits GPU 73% | CPU Limits GPU 73% |
| 1440p (2K QHD) | CPU Limits GPU 58% | CPU Limits GPU 58% | CPU Limits GPU 57% | CPU Limits GPU 57% |
| 4K (Ultra HD) | CPU Limits GPU 58% | CPU Limits GPU 58% | CPU Limits GPU 57% | CPU Limits GPU 57% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (46% below minimum). Expect performance issues. Low settings recommended.
-33%vsrecommended
+708%vsrecommended
-46%vsminimum
+1608%vsminimum
Yes, the A10-9700 paired with the GeForce RTX 5090 can run Dead by Daylight smoothly up to 1080p achieving around 60 FPS at Ultra quality. Your GPU is 708% above the recommended specs, and your CPU is 33% below the recommended requirements.
This CPU + GPU combo costs approximately $2740 ($40 CPU + $2700 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #4 for value).
For Dead by Daylight, upgrading the CPU would have the biggest impact on performance. The A10-9700 is currently the limiting factor — the GeForce RTX 5090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Dead by Daylight does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Dead by Daylight requires at minimum a Core i3-4170 (CPU) and GeForce GTX 460 (GPU) with 8 GB RAM and 50 GB storage. For the recommended experience, you need a Core i3-4170 and GeForce GTX 760 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Dead by Daylight FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
