1Can the A4-6300B and GeForce RTX 4090 run Counter-Strike 2 well?
The A4-6300B and GeForce RTX 4090 will struggle to run Counter-Strike 2 at smooth framerates.
Counter-Strike 2FPS onA4-6300B&GeForce RTX 4090
Counter-Strike 2
The transition from Global Offensive to Counter-Strike 2 marked the end of the DX9 era for Valve. The new Source 2 engine introduces physically based rendering and dynamic smoke that interacts with lighting, significantly changing the performance profile. While CS:GO was light on the GPU, CS2 requires a competent card to handle these effects without stuttering. It remains CPU-heavy at competitive settings, where the 'sub-tick' server architecture demands strong single-thread performance. CPUs with large L3 caches, like AMD's X3D line, offer a major advantage. 8GB of RAM is now the absolute minimum, though more is recommended to avoid hitches.
Performance Report
Counter-Strike 2
GeForce RTX 4090 + A4-6300B
🎮Visual Experience
✅Official Requirements
The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Counter-Strike 2. The A4-6300B is 48% below minimum CPU requirement.
✅FPS Ceiling Analysis
No major FPS-ceiling mismatch detected. The GeForce RTX 4090 and A4-6300B stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
📊Predicted Hardware Utilization for A4-6300B and GeForce RTX 4090
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU97% - 100% <> GPU14% - 30% <> | CPU95% - 100% <> GPU21% - 45% <> | CPU96% - 99% <> GPU23% - 53% <> | CPU94% - 99% <> GPU25% - 56% <> |
| 1440p (2K QHD) | CPU88% - 100% <> GPU32% - 50% <> | CPU84% - 97% <> GPU58% - 74% <> | CPU78% - 95% <> GPU72% - 86% <> | CPU74% - 95% <> GPU75% - 92% <> |
| 4K (Ultra HD) | CPU62% - 86% <> GPU45% - 87% <> | CPU58% - 84% <> GPU85% - 96% <> | CPU48% - 72% <> GPU86% - 100% <> | CPU35% - 55% <> GPU87% - 100% <> |
1080p (Full HD)
Low
CPU97% - 100%
<>
GPU14% - 30%
<>
Medium
CPU95% - 100%
<>
GPU21% - 45%
<>
High
CPU96% - 99%
<>
GPU23% - 53%
<>
Ultra
CPU94% - 99%
<>
GPU25% - 56%
<>
1440p (2K QHD)
Low
CPU88% - 100%
<>
GPU32% - 50%
<>
Medium
CPU84% - 97%
<>
GPU58% - 74%
<>
High
CPU78% - 95%
<>
GPU72% - 86%
<>
Ultra
CPU74% - 95%
<>
GPU75% - 92%
<>
4K (Ultra HD)
Low
CPU62% - 86%
<>
GPU45% - 87%
<>
Medium
CPU58% - 84%
<>
GPU85% - 96%
<>
High
CPU48% - 72%
<>
GPU86% - 100%
<>
Ultra
CPU35% - 55%
<>
GPU87% - 100%
<>
Performance Summary
The A4-6300B + GeForce RTX 4090 pairing runs this title with CPU utilization between 35% and 100% and GPU utilization between 14% and 100%. A4-6300B reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 33% at 1080p to 86% at 4K, while CPU averages move from 98% to 63%.
Load Interpretation
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 94% usage (87-100%), while the A4-6300B stays at 45% (35-55%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
Resolution Scaling
At 1080p, averages sit around CPU 98% and GPU 33%. At 1440p, that shifts to CPU 89% and GPU 68%, and at 4K it reaches CPU 63% and GPU 86%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
Optimal Settings Recommendation
4K (Ultra HD) Medium is the most balanced preset based on this dataset. It runs around CPU 71% (58-84%) and GPU 90% (85-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while A4-6300B remains stable for consistent frame delivery.
Upgrade Insight
Current utilization does not show an urgent upgrade requirement for either component; the A4-6300B and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
- High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
- High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
- Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
Counter-Strike 2 Requirements Comparison
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
CPU - A4-6300B
1,328
Your Score
MinimumCore i5 750
RecommendedCore i7-9700K
GPU - GeForce RTX 4090
38,112
Your Score
MinimumGeForce GTX 660
RecommendedGeForce RTX 2070
Your hardware is below minimum requirements. CPU is the limiting factor (48% below minimum). Expect performance issues. Low settings recommended.
-92%vsrecommended
+136%vsrecommended
-48%vsminimum
+843%vsminimum
Minimum Requirements
Recommended Requirements
Video Card: GeForce RTX 2070
Processor: Core i7-9700K
Memory: 16 GB
Disk Space: 85 GB (SSD)
System: Windows 10 64-bit
Frequently Asked Questions
2Is there a more cost-effective setup to run Counter-Strike 2?
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
3Which component should I upgrade first to improve Counter-Strike 2 performance?
This setup is already well-balanced for Counter-Strike 2. No significant bottleneck - CPU and GPU are well matched across all settings. Both the A4-6300B and GeForce RTX 4090 complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.
4Does this setup support Frame Generation for Counter-Strike 2?
Counter-Strike 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
5What are the minimum and recommended specs for Counter-Strike 2?
Counter-Strike 2 requires at minimum a Core i5 750 (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 85 GB storage. For the recommended experience, you need a Core i7-9700K and GeForce RTX 2070 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
6How accurate are these Counter-Strike 2 FPS estimates for the A4-6300B and GeForce RTX 4090?
These Counter-Strike 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.