Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 72 FPS. At 1440p, all settings exceed 72 FPS. At 4K, frame rates range from 54 to 72 FPS.
The GeForce RTX 4090 is 315% above the recommended GPU (GeForce GTX 1060 5GB) for Delta Force. The A8-5600K is 31% below minimum CPU requirement.
The A8-5600K sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the A8-5600K sets the ceiling at about 72 FPS, while the GeForce RTX 4090 could reach 337 FPS. In this scenario, the CPU limits the GPU potential by 79% (FPS gap: 265 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your A8-5600K is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 79% | CPU Limits GPU 78% | CPU Limits GPU 77% | CPU Limits GPU 73% |
| 1440p (2K QHD) | CPU Limits GPU 71% | CPU Limits GPU 70% | CPU Limits GPU 67% | CPU Limits GPU 62% |
| 4K (Ultra HD) | CPU Limits GPU 55% | CPU Limits GPU 53% | CPU Limits GPU 46% | CPU Limits GPU 48% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU88% - 99% <> GPU56% - 70% <> | CPU88% - 99% <> GPU56% - 70% <> | CPU80% - 100% <> GPU59% - 74% <> | CPU83% - 100% <> GPU59% - 74% <> |
| 1440p (2K QHD) | CPU54% - 75% <> GPU88% - 92% <> | CPU54% - 75% <> GPU88% - 92% <> | CPU46% - 75% <> GPU92% - 95% <> | CPU50% - 76% <> GPU91% - 95% <> |
| 4K (Ultra HD) | CPU43% - 54% <> GPU91% - 92% <> | CPU43% - 54% <> GPU91% - 92% <> | CPU44% - 46% <> GPU95% - 96% <> | CPU43% - 50% <> GPU95% - 96% <> |
The A8-5600K + GeForce RTX 4090 pairing runs this title with CPU utilization between 43% and 100% and GPU utilization between 56% and 96%. A8-5600K reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 65% at 1080p to 94% at 4K, while CPU averages move from 93% to 47%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) High, the GeForce RTX 4090 averages 96% usage (95-96%), while the A8-5600K stays at 45% (44-46%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 93% and GPU 65%. At 1440p, that shifts to CPU 63% and GPU 92%, and at 4K it reaches CPU 47% and GPU 94%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 64% (54-75%) and GPU 90% (88-92%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while A8-5600K remains stable for consistent frame delivery.
Both components are stressed near their limits in the heaviest presets (A8-5600K: 94% avg, GeForce RTX 4090: 96% avg). A targeted upgrade should follow your target resolution: GPU first for higher image quality, CPU first for higher minimum FPS.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (31% below minimum). Expect performance issues. Low settings recommended.
-68%vsrecommended
+315%vsrecommended
-31%vsminimum
+521%vsminimum
Yes, the A8-5600K paired with the GeForce RTX 4090 can run Delta Force smoothly up to 1440p achieving around 72 FPS at Ultra quality. Your GPU is 315% above the recommended specs, and your CPU is 68% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Delta Force, upgrading the CPU would have the biggest impact on performance. The A8-5600K is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Delta Force does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
