While the base game is older and lighter, GTA V remains relevant due to FiveM RP servers, which drastically increase RAM and CPU consumption due to mods and scripts. The official 'Enhanced' version also recommends modern hardware to handle increased traffic density.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 62 FPS. At 1440p, all settings exceed 62 FPS. At 4K, frame rates range from 50 to 62 FPS.
The GeForce RTX 4090 is 734% above the recommended GPU (GeForce GTX 660) for Grand Theft Auto V. The A8-6500B is 58% below recommended, but 19% above minimum.
The A8-6500B sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p medium, the A8-6500B sets the ceiling at about 62 FPS, while the GeForce RTX 4090 could reach 186 FPS. In this scenario, the CPU limits the GPU potential by 67% (FPS gap: 124 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your A8-6500B is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 65% | CPU Limits GPU 67% | CPU Limits GPU 66% | CPU Limits GPU 64% |
| 1440p (2K QHD) | CPU Limits GPU 63% | CPU Limits GPU 66% | CPU Limits GPU 64% | CPU Limits GPU 58% |
| 4K (Ultra HD) | CPU Limits GPU 55% | CPU Limits GPU 54% | CPU Limits GPU 51% | CPU Limits GPU 53% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU49% - 69% <> GPU91% - 99% <> | CPU51% - 69% <> GPU93% - 97% <> | CPU51% - 69% <> GPU93% - 97% <> | CPU49% - 71% <> GPU98% - 98% |
| 1440p (2K QHD) | CPU30% - 62% <> GPU95% - 100% <> | CPU31% - 62% <> GPU97% - 98% <> | CPU31% - 62% <> GPU97% - 98% <> | CPU32% - 63% <> GPU98% - 99% <> |
| 4K (Ultra HD) | CPU27% - 59% <> GPU96% - 100% <> | CPU29% - 59% <> GPU98% - 98% | CPU29% - 59% <> GPU98% - 98% | CPU29% - 59% <> GPU98% - 100% <> |
The A8-6500B + GeForce RTX 4090 pairing runs this title with CPU utilization between 27% and 71% and GPU utilization between 91% and 100%. A8-6500B stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 96% at 1080p to 98% at 4K, while CPU averages move from 60% to 44%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 99% usage (98-100%), while the A8-6500B stays at 44% (29-59%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 60% and GPU 96%. At 1440p, that shifts to CPU 47% and GPU 98%, and at 4K it reaches CPU 44% and GPU 98%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 59% (49-69%) and GPU 95% (91-99%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while A8-6500B remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 99% average load at 4K (Ultra HD) Ultra while the A8-6500B still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 58% below recommended and your GPU is 734% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-58%vsrecommended
+734%vsrecommended
+19%vsminimum
+2650%vsminimum
Yes, the A8-6500B paired with the GeForce RTX 4090 can run Grand Theft Auto V smoothly up to 1440p achieving around 62 FPS at Ultra quality. Your GPU is 734% above the recommended specs, and your CPU is 58% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Grand Theft Auto V, upgrading the CPU would have the biggest impact on performance. The A8-6500B is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Grand Theft Auto V does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Grand Theft Auto V requires at minimum a Core 2 Quad Q6600 (CPU) and GeForce 9800 GT (GPU) with 4 GB RAM and 72 GB storage. For the recommended experience, you need a Core i5-3470 and GeForce GTX 660 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Grand Theft Auto V FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
