Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 95 FPS. At 1440p, all settings exceed 84 FPS. At 4K, frame rates range from 53 to 92 FPS.
The Radeon RX 5700 XT 50th Anniversary is 65% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
The Radeon RX 5700 XT 50th Anniversary sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $728.13. At 1080p Ultra, this combo delivers 95 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.236 fps/$ | 0.185 fps/$ | 0.154 fps/$ | 0.130 fps/$ |
| 1440p | 0.205 fps/$ | 0.163 fps/$ | 0.133 fps/$ | 0.115 fps/$ |
| 4k | 0.126 fps/$ | 0.104 fps/$ | 0.078 fps/$ | 0.073 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k high, the Radeon RX 5700 XT 50th Anniversary sets the ceiling at about 65 FPS, while the Ryzen 7 7800X3D has headroom up to 113 FPS. In this scenario, the GPU limits the CPU potential by 42% (FPS gap: 48 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 5700 XT 50th Anniversary is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 18% | GPU Limits CPU 18% | GPU Limits CPU 27% | GPU Limits CPU 34% |
| 1440p (2K QHD) | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 34% | GPU Limits CPU 38% |
| 4K (Ultra HD) | GPU Limits CPU 37% | GPU Limits CPU 37% | GPU Limits CPU 42% | GPU Limits CPU 42% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 65% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+161%vsrecommended
+65%vsrecommended
+598%vsminimum
+325%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Radeon RX 5700 XT 50th Anniversary can run Naraka: Bladepoint smoothly up to 1440p achieving around 84 FPS at Ultra quality. Your GPU is 65% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $728.13 ($378.13 CPU + $350 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 3070 Ti for around $599 (Rank #185 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 5700 XT 50th Anniversary is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and Radeon RX 5700 XT 50th Anniversary both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
