A Source engine sandbox where performance depends entirely on the mods and contraptions you spawn. RAM errors are common on systems with only 4GB.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 99 FPS. At 1440p, all settings exceed 73 FPS. At 4K, frame rates range from 39 to 77 FPS.
The GeForce GTX 1060 with Max-Q Design is 137% above the recommended GPU (GeForce GTX 750) for Garry's Mod. The Ryzen 7 7800X3D is 160% above the recommended CPU (Core i5).
The GeForce GTX 1060 with Max-Q Design sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $478.13. At 1080p Ultra, this combo delivers 99 FPS, equivalent to 0.21 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.468 fps/$ | 0.356 fps/$ | 0.268 fps/$ | 0.207 fps/$ |
| 1440p | 0.312 fps/$ | 0.284 fps/$ | 0.224 fps/$ | 0.153 fps/$ |
| 4k | 0.161 fps/$ | 0.140 fps/$ | 0.115 fps/$ | 0.082 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the GeForce GTX 1060 with Max-Q Design sets the ceiling at about 45 FPS, while the Ryzen 7 7800X3D has headroom up to 346 FPS. In this scenario, the GPU limits the CPU potential by 87% (FPS gap: 301 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1060 with Max-Q Design is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 63% | GPU Limits CPU 66% | GPU Limits CPU 72% | GPU Limits CPU 78% |
| 1440p (2K QHD) | GPU Limits CPU 74% | GPU Limits CPU 74% | GPU Limits CPU 77% | GPU Limits CPU 83% |
| 4K (Ultra HD) | GPU Limits CPU 83% | GPU Limits CPU 83% | GPU Limits CPU 84% | GPU Limits CPU 87% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 160% above and your GPU is 137% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+160%vsrecommended
+137%vsrecommended
+1043%vsminimum
+2280%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce GTX 1060 with Max-Q Design can run Garry's Mod smoothly up to 1440p achieving around 73 FPS at Ultra quality. Your GPU is 137% above the recommended specs, and your CPU is 160% above the recommended requirements.
This CPU + GPU combo costs approximately $478.13 ($378.13 CPU + $100 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon RX 7700 for around $449 (Rank #373 for value) could deliver noticeably better performance.
For Garry's Mod, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1060 with Max-Q Design is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Garry's Mod does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Garry's Mod requires at minimum a Pentium 4 (CPU) and GeForce 6 series (GPU) with 4 GB RAM and 5 GB storage. For the recommended experience, you need a Core i5 and GeForce GTX 750 with 8 GB RAM. Your Ryzen 7 7800X3D and GeForce GTX 1060 with Max-Q Design both exceed the recommended specs, so you're well-positioned for a great experience.
These Garry's Mod FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
