Known to slow down in the late game due to the exponential number of unit calculations. Single-core CPU speed is the most important factor for performance.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 19 to 40 FPS depending on quality settings. At 1440p, frame rates range from 10 to 21 FPS. At 4K, frame rates range from 9 to 19 FPS.
The GeForce GTX 1650 Ti with Max-Q Design is 67% above the recommended GPU (GeForce GTX 570) for Hearts of Iron IV. The Ryzen 7 7800X3D is 1247% above the recommended CPU (Core i5-750).
The GeForce GTX 1650 Ti with Max-Q Design sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p medium, the GeForce GTX 1650 Ti with Max-Q Design sets the ceiling at about 16 FPS, while the Ryzen 7 7800X3D has headroom up to 99 FPS. In this scenario, the GPU limits the CPU potential by 84% (FPS gap: 83 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1650 Ti with Max-Q Design is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 70% | GPU Limits CPU 76% | GPU Limits CPU 70% | GPU Limits CPU 66% |
| 1440p (2K QHD) | GPU Limits CPU 81% | GPU Limits CPU 84% | GPU Limits CPU 82% | GPU Limits CPU 76% |
| 4K (Ultra HD) | GPU Limits CPU 79% | GPU Limits CPU 83% | GPU Limits CPU 79% | GPU Limits CPU 77% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 1247% above and your GPU is 67% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+1247%vsrecommended
+67%vsrecommended
+857%vsminimum
+109%vsminimum
The Ryzen 7 7800X3D and GeForce GTX 1650 Ti with Max-Q Design will struggle to run Hearts of Iron IV at smooth framerates. At 1080p Ultra, you can expect around 19 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Hearts of Iron IV, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1650 Ti with Max-Q Design is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Hearts of Iron IV does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Hearts of Iron IV requires at minimum a Core 2 Quad Q9400 (CPU) and GeForce GTX 470 (GPU) with 4 GB RAM and 2 GB storage. For the recommended experience, you need a Core i5-750 and GeForce GTX 570 with 4 GB RAM. Your Ryzen 7 7800X3D and GeForce GTX 1650 Ti with Max-Q Design both exceed the recommended specs, so you're well-positioned for a great experience.
These Hearts of Iron IV FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
