Cyberpunk 2077
The benchmark for modern graphical fidelity. Update 2.0 and Phantom Liberty raised the requirements, making an SSD mandatory. The dense city and NPC AI require strong multi-thread CPU performance. Path Tracing ('Overdrive Mode') is a feature reserved for high-end RTX 40 series cards with Frame Generation.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 175 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 152 FPS. At 4K, all settings exceed 91 FPS.
The GeForce RTX 5090 Laptop GPU is 77% above the recommended GPU (GeForce RTX 2060 Super) for Cyberpunk 2077. The Ryzen 7 7800X3D is 0% above the recommended CPU (Core i7-12700).
The GeForce RTX 5090 Laptop GPU sets the FPS ceiling at 1080p (medium/high/ultra), all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p low.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is the GPU.
The largest gap appears at 1080p Ultra, where the GeForce RTX 5090 Laptop GPU reaches about 173 FPS, while the Ryzen 7 7800X3D still has headroom up to roughly 204 FPS.
That means the GeForce RTX 5090 Laptop GPU is hitting its performance ceiling first, leaving a 15% gap versus the Ryzen 7 7800X3D's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 11 out of 12 cases, with 0 CPU-limited and 1 balanced results.
Overall, this is a GPU-limited combination in this game.
The GeForce RTX 5090 Laptop GPU is usually the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 7800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 5090 Laptop GPU with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 0% above and your GPU is 77% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+0%vsrecommended
+77%vsrecommended
+180%vsminimum
+190%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 5090 Laptop GPU can run Cyberpunk 2077 smoothly up to 4k achieving around 91 FPS at Ultra quality. Your GPU is 77% above the recommended specs, and your CPU is 0% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced - this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 5090 Laptop GPU is already a top-tier graphics card. In the Performance Limiter Analysis, it is still the side that most often reaches its FPS ceiling first, but there is no meaningful upgrade path that would drastically improve your Cyberpunk 2077 performance right now. The main bottleneck appears on the GPU side. The largest gap shows up at 1080p Ultra, where the GPU reaches about 173 FPS while the CPU still has headroom up to roughly 204 FPS. Across all tested settings, the distribution is 11/12 GPU-limited, 0/12 CPU-limited, and 1/12 balanced.
Cyberpunk 2077 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Cyberpunk 2077 requires at minimum a Core i7-6700 (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB (SSD) storage. For the recommended experience, you need a Core i7-12700 and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 5090 Laptop GPU both exceed the recommended specs, so you're well-positioned for a great experience.
These Cyberpunk 2077 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
