Naraka: Bladepoint
Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 10 to 26 FPS depending on quality settings. At 1440p, frame rates range from 6 to 19 FPS. At 4K, frame rates range from 4 to 12 FPS.
The Radeon HD 7620G + 8670M Dual is 85% below minimum GPU requirement for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
The Radeon HD 7620G + 8670M Dual sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $408.13. At 1080p Ultra, this combo delivers 10 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.064 fps/$ | 0.051 fps/$ | 0.042 fps/$ | 0.025 fps/$ |
| 1440p | 0.047 fps/$ | 0.034 fps/$ | 0.025 fps/$ | 0.015 fps/$ |
| 4k | 0.029 fps/$ | 0.022 fps/$ | 0.015 fps/$ | 0.010 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the GPU.
The largest gap appears at 1440p Ultra, where the Radeon HD 7620G + 8670M Dual reaches about 6 FPS, while the Ryzen 7 7800X3D still has headroom up to roughly 161 FPS.
That means the Radeon HD 7620G + 8670M Dual is hitting its performance ceiling first, leaving a 96% gap versus the Ryzen 7 7800X3D's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 12 out of 12 cases, with 0 CPU-limited and 0 balanced results.
Overall, this is a clearly GPU-bound combination in this game.
The Radeon HD 7620G + 8670M Dual is consistently the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 7800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the Radeon HD 7620G + 8670M Dual with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (85% below minimum). Expect performance issues. Low settings recommended.
+161%vsrecommended
-94%vsrecommended
+598%vsminimum
-85%vsminimum
The Ryzen 7 7800X3D and Radeon HD 7620G + 8670M Dual will struggle to run Naraka: Bladepoint at smooth framerates. At 1080p Ultra, you can expect around 10 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $408.13 ($378.13 CPU + $30 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon RX 470 (móvel) for around $179 (Rank #318 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would usually give you the most noticeable improvement. In the Performance Limiter Analysis, the Radeon HD 7620G + 8670M Dual is the side that most often caps the frame rate, while the Ryzen 7 7800X3D still has additional headroom in the tested presets. The main bottleneck appears on the GPU side. The largest gap shows up at 1440p Ultra, where the GPU reaches about 6 FPS while the CPU still has headroom up to roughly 161 FPS. Across all tested settings, the distribution is 12/12 GPU-limited, 0/12 CPU-limited, and 0/12 balanced.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
