A masterpiece of the RAGE engine, heavily taxing the GPU with volumetric lighting and water physics. Interestingly, it has relatively low CPU utilization compared to its graphical demands. Be prepared for a massive 150GB install size.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 18 to 35 FPS depending on quality settings. At 1440p, frame rates range from 12 to 19 FPS. At 4K, frame rates range from 7 to 12 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Red Dead Redemption 2. The Athlon Silver 3050e is 28% below minimum CPU requirement.
The GeForce RTX 4090 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Athlon Silver 3050e still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1709. At 1080p Ultra, this combo delivers 18 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.020 fps/$ | 0.018 fps/$ | 0.013 fps/$ | 0.011 fps/$ |
| 1440p | 0.011 fps/$ | 0.010 fps/$ | 0.008 fps/$ | 0.007 fps/$ |
| 4k | 0.007 fps/$ | 0.006 fps/$ | 0.005 fps/$ | 0.004 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce RTX 4090 sets the ceiling at about 13 FPS, while the Athlon Silver 3050e has headroom up to 68 FPS. In this scenario, the GPU limits the CPU potential by 81% (FPS gap: 55 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Athlon Silver 3050e frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 27% | GPU Limits CPU 41% | GPU Limits CPU 55% | GPU Limits CPU 65% |
| 1440p (2K QHD) | GPU Limits CPU 53% | GPU Limits CPU 61% | GPU Limits CPU 65% | GPU Limits CPU 72% |
| 4K (Ultra HD) | GPU Limits CPU 76% | GPU Limits CPU 80% | GPU Limits CPU 81% | GPU Limits CPU 81% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (28% below minimum). Expect performance issues. Low settings recommended.
-67%vsrecommended
+279%vsrecommended
-28%vsminimum
+539%vsminimum
The Athlon Silver 3050e and GeForce RTX 4090 will struggle to run Red Dead Redemption 2 at smooth framerates. At 1080p Ultra, you can expect around 18 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1709 ($60 CPU + $1649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Red Dead Redemption 2 performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Red Dead Redemption 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Red Dead Redemption 2 requires at minimum a Core i5-2500K (CPU) and GeForce GTX 770 (GPU) with 8 GB RAM and 150 GB storage. For the recommended experience, you need a Core i7-4770K and GeForce GTX 1060 with 12 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Red Dead Redemption 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
