A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 70 FPS. At 1440p, all settings exceed 70 FPS. At 4K, all settings exceed 69 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The Celeron G6900TE is 79% below minimum CPU requirement.
The Celeron G6900TE sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1713. At 1080p Ultra, this combo delivers 70 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.041 fps/$ | 0.041 fps/$ | 0.041 fps/$ | 0.041 fps/$ |
| 1440p | 0.041 fps/$ | 0.041 fps/$ | 0.041 fps/$ | 0.041 fps/$ |
| 4k | 0.041 fps/$ | 0.041 fps/$ | 0.041 fps/$ | 0.040 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Celeron G6900TE sets the ceiling at about 70 FPS, while the GeForce RTX 4090 could reach 505 FPS. In this scenario, the CPU limits the GPU potential by 86% (FPS gap: 435 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Celeron G6900TE is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 86% | CPU Limits GPU 84% | CPU Limits GPU 78% | CPU Limits GPU 74% |
| 1440p (2K QHD) | CPU Limits GPU 80% | CPU Limits GPU 79% | CPU Limits GPU 73% | CPU Limits GPU 69% |
| 4K (Ultra HD) | CPU Limits GPU 66% | CPU Limits GPU 63% | CPU Limits GPU 57% | CPU Limits GPU 46% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU86% - 89% <> GPU69% - 70% <> | CPU83% - 87% <> GPU69% - 69% | CPU83% - 87% <> GPU69% - 69% | CPU86% - 88% <> GPU68% - 69% <> |
| 1440p (2K QHD) | CPU85% - 88% <> GPU70% - 70% | CPU83% - 86% <> GPU69% - 70% <> | CPU83% - 86% <> GPU69% - 70% <> | CPU83% - 86% <> GPU69% - 70% <> |
| 4K (Ultra HD) | CPU81% - 89% <> GPU70% - 70% | CPU80% - 87% <> GPU69% - 70% <> | CPU80% - 87% <> GPU69% - 70% <> | CPU80% - 87% <> GPU69% - 70% <> |
The Celeron G6900TE + GeForce RTX 4090 pairing runs this title with CPU utilization between 80% and 89% and GPU utilization between 68% and 70%. Celeron G6900TE reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 69% at 1080p to 70% at 4K, while CPU averages move from 86% to 84%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Celeron G6900TE reaches 88% average load (86-89%), while the GeForce RTX 4090 remains comparatively lower at 70% (69-70%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 86% and GPU 69%. At 1440p, that shifts to CPU 85% and GPU 70%, and at 4K it reaches CPU 84% and GPU 70%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 84% (83-86%) and GPU 70% (69-70%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Celeron G6900TE remains stable for consistent frame delivery.
Upgrade priority should be the CPU. The Celeron G6900TE reaches 88% average load at 1080p (Full HD) Low while the GeForce RTX 4090 remains comparatively underutilized, so a faster processor would improve frame-time consistency and top-end FPS.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (79% below minimum). Expect performance issues. Low settings recommended.
-87%vsrecommended
+131%vsrecommended
-79%vsminimum
+279%vsminimum
Yes, the Celeron G6900TE paired with the GeForce RTX 4090 can run Marvel Rivals smoothly up to 4k achieving around 69 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 87% below the recommended requirements.
This CPU + GPU combo costs approximately $1713 ($64 CPU (Rank #364 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Marvel Rivals, upgrading the CPU would have the biggest impact on performance. The Celeron G6900TE is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Marvel Rivals does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
