The transition from Global Offensive to Counter-Strike 2 marked the end of the DX9 era for Valve. The new Source 2 engine introduces physically based rendering and dynamic smoke that interacts with lighting, significantly changing the performance profile. While CS:GO was light on the GPU, CS2 requires a competent card to handle these effects without stuttering. It remains CPU-heavy at competitive settings, where the 'sub-tick' server architecture demands strong single-thread performance. CPUs with large L3 caches, like AMD's X3D line, offer a major advantage. 8GB of RAM is now the absolute minimum, though more is recommended to avoid hitches.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, performance runs at around 15 FPS. At 1440p, performance is around 15 FPS. At 4K, performance is around 15 FPS.
The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Counter-Strike 2. The Celeron N2808 is 76% below minimum CPU requirement.
The Celeron N2808 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Celeron N2808 sets the ceiling at about 15 FPS, while the GeForce RTX 4090 could reach 573 FPS. In this scenario, the CPU limits the GPU potential by 97% (FPS gap: 558 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Celeron N2808 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 97% | CPU Limits GPU 97% | CPU Limits GPU 96% | CPU Limits GPU 96% |
| 1440p (2K QHD) | CPU Limits GPU 97% | CPU Limits GPU 97% | CPU Limits GPU 96% | CPU Limits GPU 95% |
| 4K (Ultra HD) | CPU Limits GPU 96% | CPU Limits GPU 96% | CPU Limits GPU 95% | CPU Limits GPU 94% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU97% - 100% <> GPU6% - 27% <> | CPU95% - 99% <> GPU18% - 46% <> | CPU94% - 99% <> GPU20% - 47% <> | CPU94% - 99% <> GPU20% - 50% <> |
| 1440p (2K QHD) | CPU88% - 100% <> GPU31% - 48% <> | CPU83% - 97% <> GPU62% - 79% <> | CPU76% - 95% <> GPU74% - 89% <> | CPU74% - 96% <> GPU76% - 95% <> |
| 4K (Ultra HD) | CPU61% - 81% <> GPU42% - 88% <> | CPU57% - 79% <> GPU85% - 90% <> | CPU46% - 69% <> GPU85% - 94% <> | CPU33% - 52% <> GPU85% - 95% <> |
The Celeron N2808 + GeForce RTX 4090 pairing runs this title with CPU utilization between 33% and 100% and GPU utilization between 6% and 95%. Celeron N2808 reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 29% at 1080p to 83% at 4K, while CPU averages move from 97% to 60%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) High, the GeForce RTX 4090 averages 90% usage (85-94%), while the Celeron N2808 stays at 58% (46-69%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 97% and GPU 29%. At 1440p, that shifts to CPU 89% and GPU 70%, and at 4K it reaches CPU 60% and GPU 83%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) Medium is the most balanced preset based on this dataset. It runs around CPU 68% (57-79%) and GPU 88% (85-90%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Celeron N2808 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Celeron N2808 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (76% below minimum). Expect performance issues. Low settings recommended.
-96%vsrecommended
+136%vsrecommended
-76%vsminimum
+843%vsminimum
The Celeron N2808 and GeForce RTX 4090 will struggle to run Counter-Strike 2 at smooth framerates. At 1080p Ultra, you can expect around 15 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Counter-Strike 2, upgrading the CPU would have the biggest impact on performance. The Celeron N2808 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Counter-Strike 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Counter-Strike 2 requires at minimum a Core i5 750 (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 85 GB storage. For the recommended experience, you need a Core i7-9700K and GeForce RTX 2070 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Counter-Strike 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
