Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 133 FPS. At 1440p, all settings exceed 121 FPS. At 4K, all settings exceed 87 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Core 7 160UL is 16% below minimum CPU requirement.
The Core 7 160UL sets the FPS ceiling at all 1080p settings, 1440p ultra, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1440p (low/medium/high), all 4k settings.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the Core 7 160UL sets the ceiling at about 133 FPS, while the GeForce RTX 4090 could reach 160 FPS. In this scenario, the CPU limits the GPU potential by 17% (FPS gap: 27 FPS). Overall distribution: CPU limits 5/12 cells, GPU limits 0/12, balanced 7/12.
The Core 7 160UL and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 10% | CPU Limits GPU 13% | CPU Limits GPU 15% | CPU Limits GPU 17% |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | CPU Limits GPU 6% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU71% - 84% <> GPU68% - 94% <> | CPU68% - 90% <> GPU92% - 96% <> | CPU68% - 90% <> GPU92% - 96% <> | CPU54% - 77% <> GPU92% - 96% <> |
| 1440p (2K QHD) | CPU68% - 78% <> GPU69% - 94% <> | CPU58% - 81% <> GPU95% - 97% <> | CPU58% - 81% <> GPU95% - 97% <> | CPU44% - 67% <> GPU95% - 97% <> |
| 4K (Ultra HD) | CPU69% - 81% <> GPU65% - 95% <> | CPU60% - 83% <> GPU93% - 100% <> | CPU60% - 83% <> GPU93% - 100% <> | CPU48% - 80% <> GPU93% - 100% <> |
The Core 7 160UL + GeForce RTX 4090 pairing runs this title with CPU utilization between 44% and 90% and GPU utilization between 65% and 100%. Core 7 160UL stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 91% at 1080p to 92% at 4K, while CPU averages move from 76% to 71%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 96% average at its highest-load preset, while the Core 7 160UL peaks at 79% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 76% and GPU 91%. At 1440p, that shifts to CPU 67% and GPU 93%, and at 4K it reaches CPU 71% and GPU 92%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 66% (54-77%) and GPU 94% (92-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core 7 160UL remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Core 7 160UL and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (16% below minimum). Expect performance issues. Low settings recommended.
-43%vsrecommended
+183%vsrecommended
-16%vsminimum
+521%vsminimum
Yes, the Core 7 160UL paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 4k achieving around 87 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 43% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Core 7 160UL is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
