Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 134 FPS. At 1440p, all settings exceed 122 FPS. At 4K, all settings exceed 88 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Core 7 240H is 27% above the recommended CPU (Core i5-11600K).
The Core 7 240H sets the FPS ceiling at all 1080p settings, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at all 1440p settings, all 4k settings.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the Core 7 240H sets the ceiling at about 134 FPS, while the GeForce RTX 4090 could reach 159 FPS. In this scenario, the CPU limits the GPU potential by 16% (FPS gap: 25 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 0/12, balanced 8/12.
The Core 7 240H and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 8% | CPU Limits GPU 12% | CPU Limits GPU 14% | CPU Limits GPU 16% |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU55% - 62% <> GPU70% - 92% <> | CPU50% - 66% <> GPU88% - 94% <> | CPU50% - 66% <> GPU88% - 94% <> | CPU31% - 55% <> GPU87% - 94% <> |
| 1440p (2K QHD) | CPU47% - 56% <> GPU71% - 92% <> | CPU34% - 57% <> GPU91% - 95% <> | CPU34% - 57% <> GPU91% - 95% <> | CPU15% - 46% <> GPU91% - 95% <> |
| 4K (Ultra HD) | CPU48% - 69% <> GPU68% - 94% <> | CPU39% - 70% <> GPU89% - 100% <> | CPU39% - 70% <> GPU89% - 100% <> | CPU22% - 69% <> GPU89% - 100% <> |
The Core 7 240H + GeForce RTX 4090 pairing runs this title with CPU utilization between 15% and 70% and GPU utilization between 68% and 100%. Core 7 240H keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 88% at 1080p to 91% at 4K, while CPU averages move from 54% to 53%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Medium, the GeForce RTX 4090 averages 94% usage (89-100%), while the Core 7 240H stays at 54% (39-70%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 54% and GPU 88%. At 1440p, that shifts to CPU 44% and GPU 90%, and at 4K it reaches CPU 53% and GPU 91%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 43% (31-55%) and GPU 90% (87-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core 7 240H remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Core 7 240H and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 27% above and your GPU is 183% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+27%vsrecommended
+183%vsrecommended
+88%vsminimum
+521%vsminimum
Yes, the Core 7 240H paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 4k achieving around 88 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 27% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Core 7 240H is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Core 7 240H and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
