Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 35 to 72 FPS depending on quality settings. At 1440p, frame rates range from 16 to 66 FPS. At 4K, frame rates range from 11 to 29 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Core i3-4150T is 41% below minimum CPU requirement.
The Core i3-4150T sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1679. At 1080p Ultra, this combo delivers 35 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.043 fps/$ | 0.043 fps/$ | 0.036 fps/$ | 0.021 fps/$ |
| 1440p | 0.039 fps/$ | 0.029 fps/$ | 0.020 fps/$ | 0.010 fps/$ |
| 4k | 0.017 fps/$ | 0.014 fps/$ | 0.009 fps/$ | 0.007 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Core i3-4150T sets the ceiling at about 16 FPS, while the GeForce RTX 4090 could reach 195 FPS. In this scenario, the CPU limits the GPU potential by 92% (FPS gap: 179 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Core i3-4150T is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 85% | CPU Limits GPU 83% | CPU Limits GPU 83% | CPU Limits GPU 88% |
| 1440p (2K QHD) | CPU Limits GPU 79% | CPU Limits GPU 83% | CPU Limits GPU 87% | CPU Limits GPU 92% |
| 4K (Ultra HD) | CPU Limits GPU 84% | CPU Limits GPU 85% | CPU Limits GPU 89% | CPU Limits GPU 91% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU77% - 96% <> GPU46% - 67% <> | CPU77% - 96% <> GPU46% - 67% <> | CPU45% - 67% <> GPU67% - 82% <> | CPU55% - 76% <> GPU67% - 82% <> |
| 1440p (2K QHD) | CPU76% - 94% <> GPU57% - 69% <> | CPU76% - 94% <> GPU57% - 69% <> | CPU43% - 65% <> GPU82% - 85% <> | CPU52% - 74% <> GPU81% - 85% <> |
| 4K (Ultra HD) | CPU75% - 84% <> GPU49% - 69% <> | CPU75% - 84% <> GPU49% - 69% <> | CPU40% - 55% <> GPU72% - 85% <> | CPU44% - 61% <> GPU71% - 85% <> |
The Core i3-4150T + GeForce RTX 4090 pairing runs this title with CPU utilization between 40% and 96% and GPU utilization between 46% and 85%. Core i3-4150T reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 65% at 1080p to 69% at 4K, while CPU averages move from 74% to 65%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Core i3-4150T reaches 86% average load (77-96%), while the GeForce RTX 4090 remains comparatively lower at 56% (46-67%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 74% and GPU 65%. At 1440p, that shifts to CPU 72% and GPU 73%, and at 4K it reaches CPU 65% and GPU 69%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) High is the most balanced preset based on this dataset. It runs around CPU 54% (43-65%) and GPU 84% (82-85%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i3-4150T remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Core i3-4150T and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (41% below minimum). Expect performance issues. Low settings recommended.
-78%vsrecommended
+279%vsrecommended
-41%vsminimum
+877%vsminimum
The Core i3-4150T and GeForce RTX 4090 will struggle to run Naraka: Bladepoint at smooth framerates. At 1080p Ultra, you can expect around 35 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1679 ($30 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Core i3-4150T is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
