Rocket LeagueFPS onCore i3-9100TE&GeForce RTX 4090

Rocket League

Rocket League is known for its technical stability. Running on Unreal Engine 3, it is extremely lightweight with physics calculated at a fixed rate for consistency. It is so well optimized that modern integrated graphics can run it competitively at low settings without issue.

Rocket League - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low115 FPS
medium115 FPS
high115 FPS
ultra115 FPS
1440P
low115 FPS
medium115 FPS
high115 FPS
ultra115 FPS
4K
low115 FPS
medium115 FPS
high115 FPS
ultra115 FPS

Performance Report

Rocket League

GeForce RTX 4090 + Core i3-9100TE
🎮Visual Experience

At 1080p, all quality settings exceed 115 FPS. At 1440p, all settings exceed 115 FPS. At 4K, all settings exceed 115 FPS.

Official Requirements

The GeForce RTX 4090 is 700% above the recommended GPU (GeForce GTX 660) for Rocket League. The Core i3-9100TE is 111% above the recommended CPU (Quad Core 2.5 GHz).

⚙️FPS Ceiling Analysis

The Core i3-9100TE sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
Core i3-9100TE:$60(updated 2/10/2026)
Official Launch Price: $122

Combo price: $1709. At 1080p Ultra, this combo delivers 115 FPS, equivalent to 0.07 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.067 fps/$0.067 fps/$0.067 fps/$0.067 fps/$
1440p0.067 fps/$0.067 fps/$0.067 fps/$0.067 fps/$
4k0.067 fps/$0.067 fps/$0.067 fps/$0.067 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Core i3-9100TE|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p low, the Core i3-9100TE sets the ceiling at about 115 FPS, while the GeForce RTX 4090 could reach 700 FPS. In this scenario, the CPU limits the GPU potential by 84% (FPS gap: 585 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Core i3-9100TE is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 84%
MediumCPU Limits GPU 81%
HighCPU Limits GPU 77%
UltraCPU Limits GPU 74%
1440p (2K QHD)
LowCPU Limits GPU 84%
MediumCPU Limits GPU 81%
HighCPU Limits GPU 77%
UltraCPU Limits GPU 74%
4K (Ultra HD)
LowCPU Limits GPU 78%
MediumCPU Limits GPU 75%
HighCPU Limits GPU 72%
UltraCPU Limits GPU 66%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Core i3-9100TE and GeForce RTX 4090

1080p (Full HD)

Low
CPU32% - 51%
<>
GPU14% - 26%
<>
Medium
CPU32% - 51%
<>
GPU14% - 26%
<>
High
CPU32% - 51%
<>
GPU14% - 26%
<>
Ultra
CPU30% - 47%
<>
GPU20% - 30%
<>

1440p (2K QHD)

Low
CPU23% - 44%
<>
GPU7% - 24%
<>
Medium
CPU23% - 44%
<>
GPU7% - 24%
<>
High
CPU23% - 44%
<>
GPU7% - 24%
<>
Ultra
CPU22% - 41%
<>
GPU13% - 27%
<>

4K (Ultra HD)

Low
CPU23% - 43%
<>
GPU20% - 46%
<>
Medium
CPU23% - 43%
<>
GPU20% - 46%
<>
High
CPU23% - 43%
<>
GPU20% - 46%
<>
Ultra
CPU22% - 40%
<>
GPU27% - 49%
<>

Performance Summary

The Core i3-9100TE + GeForce RTX 4090 pairing runs this title with CPU utilization between 22% and 51% and GPU utilization between 7% and 49%. Core i3-9100TE keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 21% at 1080p to 34% at 4K, while CPU averages move from 41% to 33%.

Load Interpretation

Neither component is close to saturation: CPU tops out at 51% and GPU at 49%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput. It also shows why low utilization does not automatically mean there is no FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 41% and GPU 21%. At 1440p, that shifts to CPU 34% and GPU 17%, and at 4K it reaches CPU 33% and GPU 34%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 31% (22-40%) and GPU 38% (27-49%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i3-9100TE remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Core i3-9100TE and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Rocket League Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Core i3-9100TE
cpu icon
4,589
Your Score
MinimumDual Core 2.4 GHz
RecommendedQuad Core 2.5 GHz
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 260
RecommendedGeForce GTX 660

Your CPU is 111% above and your GPU is 700% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+111%vsrecommended

GPU

+700%vsrecommended

CPU

+109%vsminimum

GPU

+3076%vsminimum

Minimum Requirements
Video Card: GeForce GTX 260
Memory: 2 GB
Disk Space: 20 GB
System: Windows 7 64-bit
Recommended Requirements
Video Card: GeForce GTX 660
Memory: 4 GB
Disk Space: 20 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Core i3-9100TE and GeForce RTX 4090 run Rocket League well?

Yes, the Core i3-9100TE paired with the GeForce RTX 4090 can run Rocket League smoothly up to 4k achieving around 115 FPS at Ultra quality. Your GPU is 700% above the recommended specs, and your CPU is 111% above the recommended requirements.

2Is there a more cost-effective setup to run Rocket League?

This CPU + GPU combo costs approximately $1709 ($60 CPU (Rank #259 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).

3Which component should I upgrade first to improve Rocket League performance?

For Rocket League, upgrading the CPU would have the biggest impact on performance. The Core i3-9100TE is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Rocket League?

Rocket League does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Rocket League?

Rocket League requires at minimum a Dual Core 2.4 GHz (CPU) and GeForce GTX 260 (GPU) with 2 GB RAM and 20 GB storage. For the recommended experience, you need a Quad Core 2.5 GHz and GeForce GTX 660 with 4 GB RAM. Your Core i3-9100TE and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Rocket League FPS estimates for the Core i3-9100TE and GeForce RTX 4090?

These Rocket League FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.