Cyberpunk 2077
The benchmark for modern graphical fidelity. Update 2.0 and Phantom Liberty raised the requirements, making an SSD mandatory. The dense city and NPC AI require strong multi-thread CPU performance. Path Tracing ('Overdrive Mode') is a feature reserved for high-end RTX 40 series cards with Frame Generation.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 190 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 178 FPS. At 4K, all settings exceed 111 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Cyberpunk 2077. The Core i3-9350KF is 38% below minimum CPU requirement.
At lower resolutions (1080p (low/medium/high), 1440p (low/medium)), the Core i3-9350KF sets the FPS ceiling. As graphical load increases at (1080p ultra, 1440p ultra, all 4k settings), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p high.
Approximated average price on current market:
Combo price: $1729. At 1080p Ultra, this combo delivers 190 FPS, equivalent to 0.11 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.110 fps/$ | 0.110 fps/$ | 0.110 fps/$ | 0.110 fps/$ |
| 1440p | 0.110 fps/$ | 0.110 fps/$ | 0.110 fps/$ | 0.103 fps/$ |
| 4k | 0.110 fps/$ | 0.110 fps/$ | 0.086 fps/$ | 0.064 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is more often the GPU.
The largest gap appears at 4K Ultra, where the GeForce RTX 4090 reaches about 89 FPS, while the Core i3-9350KF still has headroom up to roughly 120 FPS.
That means the GeForce RTX 4090 is hitting its performance ceiling first, leaving a 26% gap versus the Core i3-9350KF's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 6 out of 12 cases, with 5 CPU-limited and 1 balanced results.
Overall, this is a GPU-leaning combination in this game.
The GeForce RTX 4090 is more often the limiting part in this game, so a GPU upgrade is somewhat more likely to deliver the bigger FPS gain than a CPU upgrade.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Core i3-9350KF with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 4090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (38% below minimum). Expect performance issues. Low settings recommended.
-78%vsrecommended
+131%vsrecommended
-38%vsminimum
+279%vsminimum
Yes, the Core i3-9350KF paired with the GeForce RTX 4090 can run Cyberpunk 2077 smoothly up to 4k achieving around 111 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 78% below the recommended requirements.
This CPU + GPU combo costs approximately $1,729 ($80 CPU + $1,649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. In the Performance Limiter Analysis, it is still the side that most often reaches its FPS ceiling first, but there is no meaningful upgrade path that would drastically improve your Cyberpunk 2077 performance right now. The main bottleneck appears on the GPU side. The largest gap shows up at 4K Ultra, where the GPU reaches about 89 FPS while the CPU still has headroom up to roughly 120 FPS. Across all tested settings, the distribution is 6/12 GPU-limited, 5/12 CPU-limited, and 1/12 balanced.
Cyberpunk 2077 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Cyberpunk 2077 requires at minimum a Core i7-6700 (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB (SSD) storage. For the recommended experience, you need a Core i7-12700 and GeForce RTX 2060 Super with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Cyberpunk 2077 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
