Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 161 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 115 FPS. At 4K, all settings exceed 60 FPS.
The GeForce RTX 4090 is 315% above the recommended GPU (GeForce GTX 1060 5GB) for Delta Force. The Core i3-9350KF is 16% below recommended, but 84% above minimum.
The Core i3-9350KF sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1729. At 1080p Ultra, this combo delivers 161 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.110 fps/$ | 0.110 fps/$ | 0.110 fps/$ | 0.093 fps/$ |
| 1440p | 0.109 fps/$ | 0.093 fps/$ | 0.083 fps/$ | 0.067 fps/$ |
| 4k | 0.069 fps/$ | 0.056 fps/$ | 0.047 fps/$ | 0.035 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Core i3-9350KF sets the ceiling at about 190 FPS, while the GeForce RTX 4090 could reach 351 FPS. In this scenario, the CPU limits the GPU potential by 46% (FPS gap: 161 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Core i3-9350KF is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 46% | CPU Limits GPU 41% | CPU Limits GPU 39% | CPU Limits GPU 39% |
| 1440p (2K QHD) | CPU Limits GPU 25% | CPU Limits GPU 33% | CPU Limits GPU 35% | CPU Limits GPU 38% |
| 4K (Ultra HD) | CPU Limits GPU 28% | CPU Limits GPU 37% | CPU Limits GPU 38% | CPU Limits GPU 41% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU77% - 92% <> GPU58% - 74% <> | CPU77% - 92% <> GPU58% - 74% <> | CPU70% - 93% <> GPU61% - 77% <> | CPU74% - 93% <> GPU60% - 77% <> |
| 1440p (2K QHD) | CPU44% - 64% <> GPU91% - 96% <> | CPU44% - 64% <> GPU91% - 96% <> | CPU37% - 66% <> GPU95% - 100% <> | CPU40% - 66% <> GPU93% - 99% <> |
| 4K (Ultra HD) | CPU42% - 45% <> GPU93% - 97% <> | CPU42% - 45% <> GPU93% - 97% <> | CPU35% - 46% <> GPU97% - 100% <> | CPU39% - 46% <> GPU96% - 100% <> |
The Core i3-9350KF + GeForce RTX 4090 pairing runs this title with CPU utilization between 35% and 93% and GPU utilization between 58% and 100%. Core i3-9350KF stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 67% at 1080p to 97% at 4K, while CPU averages move from 84% to 43%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 98% usage (95-100%), while the Core i3-9350KF stays at 52% (37-66%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 84% and GPU 67%. At 1440p, that shifts to CPU 53% and GPU 96%, and at 4K it reaches CPU 43% and GPU 97%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 54% (44-64%) and GPU 94% (91-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i3-9350KF remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Core i3-9350KF and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 16% below recommended and your GPU is 315% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-16%vsrecommended
+315%vsrecommended
+84%vsminimum
+521%vsminimum
Yes, the Core i3-9350KF paired with the GeForce RTX 4090 can run Delta Force smoothly up to 4k achieving around 60 FPS at Ultra quality. Your GPU is 315% above the recommended specs, and your CPU is 16% below the recommended requirements.
This CPU + GPU combo costs approximately $1729 ($80 CPU (Rank #198 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Delta Force, upgrading the CPU would have the biggest impact on performance. The Core i3-9350KF is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Delta Force does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
