1Can the Core i3-L13G4 and GeForce RTX 4090 run Naraka: Bladepoint well?
The Core i3-L13G4 and GeForce RTX 4090 will struggle to run Naraka: Bladepoint at smooth framerates.
Naraka: BladepointFPS onCore i3-L13G4&GeForce RTX 4090
Naraka: Bladepoint
Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Performance Report
Naraka: Bladepoint
GeForce RTX 4090 + Core i3-L13G4
🎮Visual Experience
✅Official Requirements
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Core i3-L13G4 is 73% below minimum CPU requirement.
✅FPS Ceiling Analysis
No major FPS-ceiling mismatch detected. The GeForce RTX 4090 and Core i3-L13G4 stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
📊Predicted Hardware Utilization for Core i3-L13G4 and GeForce RTX 4090
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU77% - 97% <> GPU46% - 67% <> | CPU77% - 97% <> GPU46% - 67% <> | CPU45% - 69% <> GPU67% - 82% <> | CPU55% - 78% <> GPU67% - 82% <> |
| 1440p (2K QHD) | CPU76% - 96% <> GPU57% - 69% <> | CPU76% - 96% <> GPU57% - 69% <> | CPU43% - 68% <> GPU82% - 85% <> | CPU52% - 77% <> GPU81% - 85% <> |
| 4K (Ultra HD) | CPU75% - 86% <> GPU49% - 69% <> | CPU75% - 86% <> GPU49% - 69% <> | CPU40% - 57% <> GPU72% - 85% <> | CPU44% - 63% <> GPU71% - 85% <> |
1080p (Full HD)
Low
CPU77% - 97%
<>
GPU46% - 67%
<>
Medium
CPU77% - 97%
<>
GPU46% - 67%
<>
High
CPU45% - 69%
<>
GPU67% - 82%
<>
Ultra
CPU55% - 78%
<>
GPU67% - 82%
<>
1440p (2K QHD)
Low
CPU76% - 96%
<>
GPU57% - 69%
<>
Medium
CPU76% - 96%
<>
GPU57% - 69%
<>
High
CPU43% - 68%
<>
GPU82% - 85%
<>
Ultra
CPU52% - 77%
<>
GPU81% - 85%
<>
4K (Ultra HD)
Low
CPU75% - 86%
<>
GPU49% - 69%
<>
Medium
CPU75% - 86%
<>
GPU49% - 69%
<>
High
CPU40% - 57%
<>
GPU72% - 85%
<>
Ultra
CPU44% - 63%
<>
GPU71% - 85%
<>
Performance Summary
The Core i3-L13G4 + GeForce RTX 4090 pairing runs this title with CPU utilization between 40% and 97% and GPU utilization between 46% and 85%. Core i3-L13G4 reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 65% at 1080p to 69% at 4K, while CPU averages move from 74% to 66%.
Load Interpretation
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Core i3-L13G4 reaches 87% average load (77-97%), while the GeForce RTX 4090 remains comparatively lower at 56% (46-67%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
Resolution Scaling
At 1080p, averages sit around CPU 74% and GPU 65%. At 1440p, that shifts to CPU 73% and GPU 73%, and at 4K it reaches CPU 66% and GPU 69%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
Optimal Settings Recommendation
1440p (2K QHD) High is the most balanced preset based on this dataset. It runs around CPU 56% (43-68%) and GPU 84% (82-85%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i3-L13G4 remains stable for consistent frame delivery.
Upgrade Insight
Current utilization does not show an urgent upgrade requirement for either component; the Core i3-L13G4 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
- High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
- High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
- Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
Naraka: Bladepoint Requirements Comparison
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
CPU - Core i3-L13G4
1,349
Your Score
MinimumCore i5-4460
RecommendedCore i7-7700
GPU - GeForce RTX 4090
38,112
Your Score
MinimumGeForce GTX 750 Ti
RecommendedGeForce GTX 1060
Your hardware is below minimum requirements. CPU is the limiting factor (73% below minimum). Expect performance issues. Low settings recommended.
-90%vsrecommended
+279%vsrecommended
-73%vsminimum
+877%vsminimum
Minimum Requirements
Video Card: GeForce GTX 750 Ti
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 20 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1060
Processor: Core i7-7700
Memory: 16 GB
Disk Space: 20 GB (SSD)
System: Windows 10 64-bit
Frequently Asked Questions
2Is there a more cost-effective setup to run Naraka: Bladepoint?
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
3Which component should I upgrade first to improve Naraka: Bladepoint performance?
This setup is already well-balanced for Naraka: Bladepoint. No significant bottleneck - CPU and GPU are well matched across all settings. Both the Core i3-L13G4 and GeForce RTX 4090 complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.
4Does this setup support Frame Generation for Naraka: Bladepoint?
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
5What are the minimum and recommended specs for Naraka: Bladepoint?
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
6How accurate are these Naraka: Bladepoint FPS estimates for the Core i3-L13G4 and GeForce RTX 4090?
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.