Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 78 FPS. At 1440p, all settings exceed 69 FPS. At 4K, frame rates range from 41 to 77 FPS.
The GeForce RTX 4060 is 94% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Core i5-13400F is 90% above the recommended CPU (Core i7-7700).
At lower resolutions (1080p (low/medium), 1440p (low/medium)), the Core i5-13400F sets the FPS ceiling. As graphical load increases at (1080p ultra, 1440p (high/ultra), all 4k settings), the GeForce RTX 4060 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p high.
Approximated average price on current market:
Combo price: $639.6600000000001. At 1080p Ultra, this combo delivers 78 FPS, equivalent to 0.12 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.250 fps/$ | 0.183 fps/$ | 0.150 fps/$ | 0.122 fps/$ |
| 1440p | 0.228 fps/$ | 0.172 fps/$ | 0.139 fps/$ | 0.108 fps/$ |
| 4k | 0.120 fps/$ | 0.097 fps/$ | 0.077 fps/$ | 0.064 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the GeForce RTX 4060 sets the ceiling at about 57 FPS, while the Core i5-13400F has headroom up to 82 FPS. In this scenario, the GPU limits the CPU potential by 30% (FPS gap: 25 FPS). Overall distribution: GPU limits 7/12 cells, CPU limits 4/12, balanced 1/12.
Your GeForce RTX 4060 is the limiting side in the heaviest mismatch. This means part of the Core i5-13400F frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 16% | CPU Limits GPU 13% | Balanced | GPU Limits CPU 11% |
| 1440p (2K QHD) | CPU Limits GPU 12% | CPU Limits GPU 6% | GPU Limits CPU 10% | GPU Limits CPU 20% |
| 4K (Ultra HD) | GPU Limits CPU 20% | GPU Limits CPU 21% | GPU Limits CPU 29% | GPU Limits CPU 30% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 90% above and your GPU is 94% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+90%vsrecommended
+94%vsrecommended
+409%vsminimum
+401%vsminimum
Yes, the Core i5-13400F paired with the GeForce RTX 4060 can run Naraka: Bladepoint smoothly up to 1440p achieving around 69 FPS at Ultra quality. Your GPU is 94% above the recommended specs, and your CPU is 90% above the recommended requirements.
This CPU + GPU combo costs approximately $639.6600000000001 ($180 CPU + $459.66 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon RX 6900 XT for around $999 (Rank #190 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 is the limiting factor here, while the Core i5-13400F still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p ultra, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. CPU-limited at: 1080p low, 1080p medium, 1440p low, 1440p medium.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Core i5-13400F and GeForce RTX 4060 both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
