Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.
This game has a built-in FPS cap of 300 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 14 to 83 FPS depending on quality settings. At 1440p, frame rates range from 11 to 45 FPS. At 4K, frame rates range from 4 to 16 FPS.
The GeForce RTX 4090 is 295% above the recommended GPU (GeForce GTX 970) for Apex Legends. The Core i5-9500T is 11% below recommended, but 87% above minimum.
The GeForce RTX 4090 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Core i5-9500T still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1781. At 1080p Ultra, this combo delivers 14 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.047 fps/$ | 0.031 fps/$ | 0.016 fps/$ | 0.008 fps/$ |
| 1440p | 0.025 fps/$ | 0.017 fps/$ | 0.011 fps/$ | 0.006 fps/$ |
| 4k | 0.009 fps/$ | 0.007 fps/$ | 0.003 fps/$ | 0.002 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce RTX 4090 sets the ceiling at about 4 FPS, while the Core i5-9500T has headroom up to 116 FPS. In this scenario, the GPU limits the CPU potential by 97% (FPS gap: 112 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Core i5-9500T frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 55% | GPU Limits CPU 69% | GPU Limits CPU 85% | GPU Limits CPU 92% |
| 1440p (2K QHD) | GPU Limits CPU 74% | GPU Limits CPU 82% | GPU Limits CPU 88% | GPU Limits CPU 94% |
| 4K (Ultra HD) | GPU Limits CPU 91% | GPU Limits CPU 92% | GPU Limits CPU 96% | GPU Limits CPU 97% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU54% - 91% <> GPU94% - 98% <> | CPU47% - 89% <> GPU98% - 100% <> | CPU48% - 90% <> GPU96% - 99% <> | CPU48% - 91% <> GPU97% - 99% <> |
| 1440p (2K QHD) | CPU52% - 90% <> GPU94% - 98% <> | CPU46% - 87% <> GPU99% - 100% <> | CPU47% - 88% <> GPU98% - 99% <> | CPU48% - 89% <> GPU99% - 99% |
| 4K (Ultra HD) | CPU51% - 89% <> GPU94% - 98% <> | CPU45% - 87% <> GPU98% - 100% <> | CPU46% - 88% <> GPU97% - 99% <> | CPU47% - 89% <> GPU98% - 99% <> |
The Core i5-9500T + GeForce RTX 4090 pairing runs this title with CPU utilization between 45% and 91% and GPU utilization between 94% and 100%. Core i5-9500T stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 98% at 1080p to 98% at 4K, while CPU averages move from 70% to 68%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 100% average at its highest-load preset, while the Core i5-9500T peaks at 72% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 70% and GPU 98%. At 1440p, that shifts to CPU 68% and GPU 98%, and at 4K it reaches CPU 68% and GPU 98%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 72% (54-91%) and GPU 96% (94-98%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i5-9500T remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Core i5-9500T and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 11% below recommended and your GPU is 295% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-11%vsrecommended
+295%vsrecommended
+87%vsminimum
+3160%vsminimum
The Core i5-9500T and GeForce RTX 4090 will struggle to run Apex Legends at smooth framerates. At 1080p Ultra, you can expect around 14 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1781 ($132 CPU + $1649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Apex Legends performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
