Counter-Strike 2FPS onCore i7-11375H&GeForce RTX 4090

Counter-Strike 2

The transition from Global Offensive to Counter-Strike 2 marked the end of the DX9 era for Valve. The new Source 2 engine introduces physically based rendering and dynamic smoke that interacts with lighting, significantly changing the performance profile. While CS:GO was light on the GPU, CS2 requires a competent card to handle these effects without stuttering. It remains CPU-heavy at competitive settings, where the 'sub-tick' server architecture demands strong single-thread performance. CPUs with large L3 caches, like AMD's X3D line, offer a major advantage. 8GB of RAM is now the absolute minimum, though more is recommended to avoid hitches.

Counter-Strike 2 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low293 FPS
medium293 FPS
high293 FPS
ultra264 FPS
1440P
low293 FPS
medium293 FPS
high262 FPS
ultra218 FPS
4K
low227 FPS
medium191 FPS
high172 FPS
ultra138 FPS

Performance Report

Counter-Strike 2

GeForce RTX 4090 + Core i7-11375H
🎮Visual Experience

At 1080p, all quality settings exceed 264 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 218 FPS. At 4K, all settings exceed 138 FPS.

Official Requirements

The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Counter-Strike 2. The Core i7-11375H is 33% below recommended, but 361% above minimum.

⚙️FPS Ceiling Analysis

The Core i7-11375H sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.

Performance Limiter Analysis

Core i7-11375H|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p low, the Core i7-11375H sets the ceiling at about 293 FPS, while the GeForce RTX 4090 could reach 697 FPS. In this scenario, the CPU limits the GPU potential by 58% (FPS gap: 404 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Core i7-11375H is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 58%
MediumCPU Limits GPU 51%
HighCPU Limits GPU 40%
UltraCPU Limits GPU 39%
1440p (2K QHD)
LowCPU Limits GPU 53%
MediumCPU Limits GPU 45%
HighCPU Limits GPU 42%
UltraCPU Limits GPU 42%
4K (Ultra HD)
LowCPU Limits GPU 47%
MediumCPU Limits GPU 53%
HighCPU Limits GPU 49%
UltraCPU Limits GPU 52%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Core i7-11375H and GeForce RTX 4090

1080p (Full HD)

Low
CPU86% - 99%
<>
GPU9% - 23%
<>
Medium
CPU83% - 98%
<>
GPU19% - 46%
<>
High
CPU50% - 89%
<>
GPU20% - 48%
<>
Ultra
CPU45% - 86%
<>
GPU20% - 50%
<>

1440p (2K QHD)

Low
CPU86% - 98%
<>
GPU36% - 58%
<>
Medium
CPU80% - 96%
<>
GPU72% - 87%
<>
High
CPU47% - 84%
<>
GPU74% - 93%
<>
Ultra
CPU44% - 82%
<>
GPU76% - 94%
<>

4K (Ultra HD)

Low
CPU79% - 81%
<>
GPU35% - 89%
<>
Medium
CPU75% - 79%
<>
GPU86% - 87%
<>
High
CPU45% - 70%
<>
GPU86% - 92%
<>
Ultra
CPU41% - 51%
<>
GPU85% - 92%
<>

Performance Summary

The Core i7-11375H + GeForce RTX 4090 pairing runs this title with CPU utilization between 41% and 99% and GPU utilization between 9% and 94%. Core i7-11375H reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 29% at 1080p to 81% at 4K, while CPU averages move from 80% to 65%.

Load Interpretation

From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Core i7-11375H reaches 92% average load (86-99%), while the GeForce RTX 4090 remains comparatively lower at 16% (9-23%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 80% and GPU 29%. At 1440p, that shifts to CPU 77% and GPU 74%, and at 4K it reaches CPU 65% and GPU 81%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 46% (41-51%) and GPU 88% (85-92%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i7-11375H remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Core i7-11375H and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Counter-Strike 2 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Core i7-11375H
cpu icon
11,732
Your Score
MinimumCore i5 750
RecommendedCore i7-9700K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 660
RecommendedGeForce RTX 2070

Your CPU is 33% below recommended and your GPU is 136% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.

CPU

-33%vsrecommended

GPU

+136%vsrecommended

CPU

+361%vsminimum

GPU

+843%vsminimum

Minimum Requirements
Video Card: GeForce GTX 660
Processor: Core i5 750
Memory: 8 GB
Disk Space: 85 GB
System: Windows 10
Recommended Requirements
Video Card: GeForce RTX 2070
Processor: Core i7-9700K
Memory: 16 GB
Disk Space: 85 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Core i7-11375H and GeForce RTX 4090 run Counter-Strike 2 well?

Yes, the Core i7-11375H paired with the GeForce RTX 4090 can run Counter-Strike 2 smoothly up to 4k achieving around 138 FPS at Ultra quality. Your GPU is 136% above the recommended specs, and your CPU is 33% below the recommended requirements.

2Is there a more cost-effective setup to run Counter-Strike 2?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Counter-Strike 2 performance?

For Counter-Strike 2, upgrading the CPU would have the biggest impact on performance. The Core i7-11375H is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Counter-Strike 2?

Counter-Strike 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Counter-Strike 2?

Counter-Strike 2 requires at minimum a Core i5 750 (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 85 GB storage. For the recommended experience, you need a Core i7-9700K and GeForce RTX 2070 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.

6How accurate are these Counter-Strike 2 FPS estimates for the Core i7-11375H and GeForce RTX 4090?

These Counter-Strike 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.