Known to slow down in the late game due to the exponential number of unit calculations. Single-core CPU speed is the most important factor for performance.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 130 FPS. At 1440p, all settings exceed 106 FPS. At 4K, all settings exceed 76 FPS.
The GeForce RTX 4090 is 870% above the recommended GPU (GeForce GTX 570) for Hearts of Iron IV. The Core i7-1185G7 is 294% above the recommended CPU (Core i5-750).
At lower resolutions (4k (low/medium)), the Core i7-1185G7 sets the FPS ceiling. As graphical load increases at (all 1080p settings), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at all 1440p settings, 4k (high/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the GeForce RTX 4090 sets the ceiling at about 121 FPS, while the Core i7-1185G7 has headroom up to 151 FPS. In this scenario, the GPU limits the CPU potential by 20% (FPS gap: 30 FPS). Overall distribution: GPU limits 4/12 cells, CPU limits 2/12, balanced 6/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Core i7-1185G7 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 19% | GPU Limits CPU 17% | GPU Limits CPU 20% | GPU Limits CPU 15% |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 14% | CPU Limits GPU 14% | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 294% above and your GPU is 870% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+294%vsrecommended
+870%vsrecommended
+180%vsminimum
+1112%vsminimum
Yes, the Core i7-1185G7 paired with the GeForce RTX 4090 can run Hearts of Iron IV smoothly up to 4k achieving around 76 FPS at Ultra quality. Your GPU is 870% above the recommended specs, and your CPU is 294% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Hearts of Iron IV performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra. CPU-limited at: 4k low, 4k medium.
Hearts of Iron IV does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Hearts of Iron IV requires at minimum a Core 2 Quad Q9400 (CPU) and GeForce GTX 470 (GPU) with 4 GB RAM and 2 GB storage. For the recommended experience, you need a Core i5-750 and GeForce GTX 570 with 4 GB RAM. Your Core i7-1185G7 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Hearts of Iron IV FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
