The benchmark for modern graphical fidelity. Update 2.0 and Phantom Liberty raised the requirements, making an SSD mandatory. The dense city and NPC AI require strong multi-thread CPU performance. Path Tracing ('Overdrive Mode') is a feature reserved for high-end RTX 40 series cards with Frame Generation.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 152 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 118 FPS. At 4K, all settings exceed 68 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Cyberpunk 2077. The Core i7-1255U is 62% below recommended, but 7% above minimum.
The Core i7-1255U sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Core i7-1255U sets the ceiling at about 66 FPS, while the GeForce RTX 4090 could reach 94 FPS. In this scenario, the CPU limits the GPU potential by 30% (FPS gap: 28 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Core i7-1255U is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 15% | CPU Limits GPU 18% | CPU Limits GPU 16% | CPU Limits GPU 28% |
| 1440p (2K QHD) | CPU Limits GPU 14% | CPU Limits GPU 18% | CPU Limits GPU 15% | CPU Limits GPU 29% |
| 4K (Ultra HD) | CPU Limits GPU 14% | CPU Limits GPU 19% | CPU Limits GPU 18% | CPU Limits GPU 30% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU85% - 88% <> GPU45% - 74% <> | CPU87% - 89% <> GPU46% - 78% <> | CPU87% - 89% <> GPU48% - 81% <> | CPU87% - 88% <> GPU50% - 81% <> |
| 1440p (2K QHD) | CPU50% - 90% <> GPU85% - 95% <> | CPU45% - 87% <> GPU89% - 97% <> | CPU43% - 83% <> GPU92% - 97% <> | CPU45% - 81% <> GPU96% - 99% <> |
| 4K (Ultra HD) | CPU33% - 69% <> GPU93% - 96% <> | CPU29% - 65% <> GPU94% - 98% <> | CPU26% - 53% <> GPU95% - 98% <> | CPU23% - 46% <> GPU98% - 99% <> |
The Core i7-1255U + GeForce RTX 4090 pairing runs this title with CPU utilization between 23% and 90% and GPU utilization between 45% and 99%. Core i7-1255U reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 63% at 1080p to 96% at 4K, while CPU averages move from 88% to 43%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Medium, the Core i7-1255U reaches 88% average load (87-89%), while the GeForce RTX 4090 remains comparatively lower at 62% (46-78%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 88% and GPU 63%. At 1440p, that shifts to CPU 66% and GPU 94%, and at 4K it reaches CPU 43% and GPU 96%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 70% (50-90%) and GPU 90% (85-95%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i7-1255U remains stable for consistent frame delivery.
Both components are stressed near their limits in the heaviest presets (Core i7-1255U: 88% avg, GeForce RTX 4090: 98% avg). A targeted upgrade should follow your target resolution: GPU first for higher image quality, CPU first for higher minimum FPS.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 62% below recommended and your GPU is 131% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-62%vsrecommended
+131%vsrecommended
+7%vsminimum
+279%vsminimum
Yes, the Core i7-1255U paired with the GeForce RTX 4090 can run Cyberpunk 2077 smoothly up to 4k achieving around 68 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 62% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Cyberpunk 2077, upgrading the CPU would have the biggest impact on performance. The Core i7-1255U is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Cyberpunk 2077 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Cyberpunk 2077 requires at minimum a Core i7-6700 (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB (SSD) storage. For the recommended experience, you need a Core i7-12700 and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Cyberpunk 2077 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
