A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 178 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 125 FPS. At 4K, all settings exceed 82 FPS.
The GeForce RTX 5090 is 136% above the recommended GPU (GeForce RTX 2060 Super) for Baldur's Gate 3. The Core i7-12700F is 72% above the recommended CPU (Core i7-8700K).
The GeForce RTX 5090 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Core i7-12700F still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $2975. At 1080p Ultra, this combo delivers 178 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.093 fps/$ | 0.084 fps/$ | 0.069 fps/$ | 0.060 fps/$ |
| 1440p | 0.057 fps/$ | 0.052 fps/$ | 0.049 fps/$ | 0.042 fps/$ |
| 4k | 0.035 fps/$ | 0.033 fps/$ | 0.031 fps/$ | 0.028 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1440p medium, the GeForce RTX 5090 sets the ceiling at about 173 FPS, while the Core i7-12700F has headroom up to 227 FPS. In this scenario, the GPU limits the CPU potential by 24% (FPS gap: 54 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 5090 is the limiting side in the heaviest mismatch. This means part of the Core i7-12700F frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 11% | GPU Limits CPU 13% | GPU Limits CPU 13% | GPU Limits CPU 13% |
| 1440p (2K QHD) | GPU Limits CPU 21% | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% |
| 4K (Ultra HD) | GPU Limits CPU 21% | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 72% above and your GPU is 136% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+72%vsrecommended
+136%vsrecommended
+411%vsminimum
+303%vsminimum
Yes, the Core i7-12700F paired with the GeForce RTX 5090 can run Baldur's Gate 3 smoothly up to 4k achieving around 82 FPS at Ultra quality. Your GPU is 136% above the recommended specs, and your CPU is 72% above the recommended requirements.
This CPU + GPU combo costs approximately $2975 ($275 CPU + $2700 GPU). Your GeForce RTX 5090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 5090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Baldur's Gate 3 performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your Core i7-12700F and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
