Hogwarts LegacyFPS onCore i7-12700K&GeForce RTX 4090

Hogwarts Legacy

Known for high VRAM consumption, this game can easily saturate 8GB cards with its detailed textures. 16GB of system RAM is the minimum, with 32GB being ideal for a stutter-free experience in the open world.

Hogwarts Legacy - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low215 FPS
medium194 FPS
high157 FPS
ultra128 FPS
1440P
low135 FPS
medium122 FPS
high110 FPS
ultra90 FPS
4K
low97 FPS
medium83 FPS
high72 FPS
ultra59 FPS

Performance Report

Hogwarts Legacy

GeForce RTX 4090 + Core i7-12700K
🎮Visual Experience

At 1080p, all quality settings exceed 128 FPS. At 1440p, all settings exceed 90 FPS. At 4K, frame rates range from 59 to 97 FPS.

✅Official Requirements

The GeForce RTX 4090 is 105% above the recommended GPU (GeForce GTX 1080 Ti) for Hogwarts Legacy. The Core i7-12700K is 94% above the recommended CPU (Core i7-8700).

✅FPS Ceiling Analysis

No major FPS-ceiling mismatch detected. The GeForce RTX 4090 and Core i7-12700K stay close in effective frame-generation ceiling across the tested resolutions and quality settings.

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
Core i7-12700K:$285(updated 2/6/2026)
Official Launch Price: $409

Combo price: $1934. At 1080p Ultra, this combo delivers 128 FPS, equivalent to 0.07 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.111 fps/$0.100 fps/$0.081 fps/$0.066 fps/$
1440p0.070 fps/$0.063 fps/$0.057 fps/$0.047 fps/$
4k0.050 fps/$0.043 fps/$0.037 fps/$0.031 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Core i7-12700K|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

This CPU/GPU pair is mostly balanced in Hogwarts Legacy. Across tested presets: GPU limits in 0/12, CPU limits in 0/12, and balanced in 12/12. Peak observed performance in the sampled cells is around 215 FPS.

✅Verdict

Well Balanced

The Core i7-12700K and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
1440p (2K QHD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
4K (Ultra HD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Core i7-12700K and GeForce RTX 4090

1080p (Full HD)

Low
CPU28% - 44%
<>
GPU45% - 66%
<>
Medium
CPU29% - 45%
<>
GPU55% - 73%
<>
High
CPU31% - 47%
<>
GPU64% - 84%
<>
Ultra
CPU33% - 53%
<>
GPU71% - 94%
<>

1440p (2K QHD)

Low
CPU31% - 48%
<>
GPU66% - 87%
<>
Medium
CPU30% - 47%
<>
GPU76% - 95%
<>
High
CPU32% - 48%
<>
GPU86% - 97%
<>
Ultra
CPU33% - 53%
<>
GPU90% - 99%
<>

4K (Ultra HD)

Low
CPU20% - 28%
<>
GPU94% - 100%
<>
Medium
CPU20% - 27%
<>
GPU95% - 100%
<>
High
CPU21% - 23%
<>
GPU97% - 99%
<>
Ultra
CPU19% - 26%
<>
GPU99% - 100%
<>

Performance Summary

The Core i7-12700K + GeForce RTX 4090 pairing runs this title with CPU utilization between 19% and 53% and GPU utilization between 45% and 100%. Core i7-12700K keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 69% at 1080p to 98% at 4K, while CPU averages move from 39% to 23%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 100% usage (99-100%), while the Core i7-12700K stays at 22% (19-26%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 39% and GPU 69%. At 1440p, that shifts to CPU 40% and GPU 87%, and at 4K it reaches CPU 23% and GPU 98%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 38% (30-47%) and GPU 86% (76-95%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i7-12700K remains stable for consistent frame delivery.

Upgrade Insight

Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 100% average load at 4K (Ultra HD) Ultra while the Core i7-12700K still has headroom, so a faster graphics card would deliver the largest uplift.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Hogwarts Legacy Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Core i7-12700K
cpu icon
34,347
Your Score
MinimumCore i5-6600
RecommendedCore i7-8700
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1080 Ti

Your CPU is 94% above and your GPU is 105% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+94%vsrecommended

GPU

+105%vsrecommended

CPU

+344%vsminimum

GPU

+380%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-6600
Memory: 16 GB
Disk Space: 85 GB (SSD)
System: Windows 10 64-bit
Recommended Requirements
Processor: Core i7-8700
Memory: 16 GB
Disk Space: 85 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Core i7-12700K and GeForce RTX 4090 run Hogwarts Legacy well?

Yes, the Core i7-12700K paired with the GeForce RTX 4090 can run Hogwarts Legacy smoothly up to 1440p achieving around 90 FPS at Ultra quality. Your GPU is 105% above the recommended specs, and your CPU is 94% above the recommended requirements.

2Is there a more cost-effective setup to run Hogwarts Legacy?

This CPU + GPU combo costs approximately $1934 ($285 CPU (Rank #128 Value) + $1649 GPU (Rank #77 Value)). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.

3Which component should I upgrade first to improve Hogwarts Legacy performance?

This setup is already well-balanced for Hogwarts Legacy. No significant bottleneck - CPU and GPU are well matched across all settings. Both the Core i7-12700K and GeForce RTX 4090 complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.

4Does this setup support Frame Generation for Hogwarts Legacy?

Hogwarts Legacy does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Hogwarts Legacy?

Hogwarts Legacy requires at minimum a Core i5-6600 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 85 GB (SSD) storage. For the recommended experience, you need a Core i7-8700 and GeForce GTX 1080 Ti with 16 GB RAM. Your Core i7-12700K and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Hogwarts Legacy FPS estimates for the Core i7-12700K and GeForce RTX 4090?

These Hogwarts Legacy FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.