Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 202 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 109 FPS. At 4K, all settings exceed 63 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The Core i7-1370P is 42% below recommended, but 51% above minimum.
At lower resolutions (1440p ultra, all 4k settings), the Core i7-1370P sets the FPS ceiling. As graphical load increases at (all 1080p settings, 1440p (low/medium)), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p high.
Approximated average price on current market:
Combo price: $1929. At 1080p Ultra, this combo delivers 202 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.105 fps/$ | 0.112 fps/$ | 0.111 fps/$ | 0.105 fps/$ |
| 1440p | 0.061 fps/$ | 0.060 fps/$ | 0.059 fps/$ | 0.057 fps/$ |
| 4k | 0.046 fps/$ | 0.046 fps/$ | 0.042 fps/$ | 0.033 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Core i7-1370P sets the ceiling at about 63 FPS, while the GeForce RTX 4090 could reach 93 FPS. In this scenario, the CPU limits the GPU potential by 32% (FPS gap: 30 FPS). Overall distribution: CPU limits 5/12 cells, GPU limits 6/12, balanced 1/12.
Your Core i7-1370P is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 28% | GPU Limits CPU 30% | GPU Limits CPU 29% | GPU Limits CPU 16% |
| 1440p (2K QHD) | GPU Limits CPU 12% | GPU Limits CPU 9% | Balanced | CPU Limits GPU 10% |
| 4K (Ultra HD) | CPU Limits GPU 11% | CPU Limits GPU 17% | CPU Limits GPU 19% | CPU Limits GPU 32% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU6% - 11% <> GPU68% - 95% <> | CPU6% - 11% <> GPU68% - 95% <> | CPU6% - 11% <> GPU68% - 95% <> | CPU9% - 10% <> GPU76% - 90% <> |
| 1440p (2K QHD) | CPU6% - 12% <> GPU80% - 95% <> | CPU6% - 12% <> GPU80% - 95% <> | CPU6% - 12% <> GPU80% - 95% <> | CPU7% - 10% <> GPU89% - 90% <> |
| 4K (Ultra HD) | CPU6% - 15% <> GPU82% - 100% <> | CPU6% - 15% <> GPU82% - 100% <> | CPU6% - 15% <> GPU82% - 100% <> | CPU7% - 13% <> GPU90% - 100% <> |
The Core i7-1370P + GeForce RTX 4090 pairing runs this title with CPU utilization between 6% and 15% and GPU utilization between 68% and 100%. Core i7-1370P keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 82% at 1080p to 92% at 4K, while CPU averages move from 9% to 10%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 95% usage (90-100%), while the Core i7-1370P stays at 10% (7-13%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 9% and GPU 82%. At 1440p, that shifts to CPU 9% and GPU 89%, and at 4K it reaches CPU 10% and GPU 92%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 9% (6-12%) and GPU 88% (80-95%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i7-1370P remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 95% average load at 4K (Ultra HD) Ultra while the Core i7-1370P still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 42% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-42%vsrecommended
+279%vsrecommended
+51%vsminimum
+1218%vsminimum
Yes, the Core i7-1370P paired with the GeForce RTX 4090 can run Genshin Impact smoothly up to 4k achieving around 63 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 42% below the recommended requirements.
This CPU + GPU combo costs approximately $1929 ($280 CPU (Rank #153 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Genshin Impact performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium. CPU-limited at: 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
