Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 239 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 103 FPS. At 4K, all settings exceed 61 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The Core i7-14700T is 8% below recommended, but 139% above minimum.
Genshin Impact supports: FSR 3 Frame Gen, AFMF. The GeForce RTX 4090 can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
At lower resolutions (1440p ultra, all 4k settings), the Core i7-14700T sets the FPS ceiling. As graphical load increases at (all 1080p settings, 1440p (low/medium)), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p high.
Approximated average price on current market:
Combo price: $2033. At 1080p Ultra, this combo delivers 239 FPS, equivalent to 0.12 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.135 fps/$ | 0.143 fps/$ | 0.134 fps/$ | 0.118 fps/$ |
| 1440p | 0.057 fps/$ | 0.055 fps/$ | 0.055 fps/$ | 0.051 fps/$ |
| 4k | 0.042 fps/$ | 0.043 fps/$ | 0.040 fps/$ | 0.030 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p medium, the GeForce RTX 4090 sets the ceiling at about 164 FPS, while the Core i7-14700T has headroom up to 290 FPS. In this scenario, the GPU limits the CPU potential by 43% (FPS gap: 126 FPS). Overall distribution: GPU limits 6/12 cells, CPU limits 5/12, balanced 1/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Core i7-14700T frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 41% | GPU Limits CPU 43% | GPU Limits CPU 40% | GPU Limits CPU 25% |
| 1440p (2K QHD) | GPU Limits CPU 10% | GPU Limits CPU 8% | Balanced | CPU Limits GPU 13% |
| 4K (Ultra HD) | CPU Limits GPU 13% | CPU Limits GPU 18% | CPU Limits GPU 18% | CPU Limits GPU 34% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 8% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-8%vsrecommended
+279%vsrecommended
+139%vsminimum
+1218%vsminimum
Yes, the Core i7-14700T paired with the GeForce RTX 4090 can run Genshin Impact smoothly up to 4k achieving around 61 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 8% below the recommended requirements.
This CPU + GPU combo costs approximately $2033 ($384 CPU (Rank #237 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Genshin Impact performance right now. GPU fully utilized at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p low, 1440p medium. CPU-limited at: 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Genshin Impact supports FSR 3 Frame Gen and AFMF, and your GeForce RTX 4090 is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
