PUBG: BATTLEGROUNDSFPS onCore i7-2637M&GeForce RTX 4090

PUBG: BATTLEGROUNDS

PUBG has improved significantly since its early access days but remains a demanding title. Large maps require aggressive asset streaming, making it sensitive to RAM and storage speed. 16GB of RAM is practically mandatory; with only 8GB, you will likely experience stuttering. An SSD is also crucial to ensure textures and buildings load in on time.

PUBG: BATTLEGROUNDS - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low47 FPS
medium47 FPS
high47 FPS
ultra47 FPS
1440P
low47 FPS
medium47 FPS
high47 FPS
ultra47 FPS
4K
low47 FPS
medium47 FPS
high47 FPS
ultra40 FPS

Performance Report

PUBG: BATTLEGROUNDS

GeForce RTX 4090 + Core i7-2637M
🎮Visual Experience

At 1080p, performance runs at around 47 FPS. At 1440p, performance is around 47 FPS. At 4K, frame rates range from 40 to 47 FPS.

Official Requirements

The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for PUBG: BATTLEGROUNDS. The Core i7-2637M is 59% below minimum CPU requirement.

⚙️FPS Ceiling Analysis

The Core i7-2637M sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.

Performance Limiter Analysis

Core i7-2637M|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p low, the Core i7-2637M sets the ceiling at about 47 FPS, while the GeForce RTX 4090 could reach 430 FPS. In this scenario, the CPU limits the GPU potential by 89% (FPS gap: 383 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Core i7-2637M is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 89%
MediumCPU Limits GPU 87%
HighCPU Limits GPU 83%
UltraCPU Limits GPU 82%
1440p (2K QHD)
LowCPU Limits GPU 86%
MediumCPU Limits GPU 85%
HighCPU Limits GPU 80%
UltraCPU Limits GPU 80%
4K (Ultra HD)
LowCPU Limits GPU 82%
MediumCPU Limits GPU 81%
HighCPU Limits GPU 74%
UltraCPU Limits GPU 74%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Core i7-2637M and GeForce RTX 4090

1080p (Full HD)

Low
CPU84% - 87%
<>
GPU40% - 69%
<>
Medium
CPU54% - 67%
<>
GPU52% - 82%
<>
High
CPU54% - 67%
<>
GPU52% - 82%
<>
Ultra
CPU54% - 75%
<>
GPU59% - 80%
<>

1440p (2K QHD)

Low
CPU85% - 89%
<>
GPU45% - 69%
<>
Medium
CPU54% - 69%
<>
GPU77% - 94%
<>
High
CPU54% - 69%
<>
GPU77% - 94%
<>
Ultra
CPU54% - 66%
<>
GPU85% - 93%
<>

4K (Ultra HD)

Low
CPU85% - 90%
<>
GPU45% - 69%
<>
Medium
CPU54% - 69%
<>
GPU75% - 94%
<>
High
CPU54% - 69%
<>
GPU75% - 94%
<>
Ultra
CPU54% - 67%
<>
GPU83% - 93%
<>

Performance Summary

The Core i7-2637M + GeForce RTX 4090 pairing runs this title with CPU utilization between 54% and 90% and GPU utilization between 40% and 94%. Core i7-2637M reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 65% at 1080p to 78% at 4K, while CPU averages move from 68% to 68%.

Load Interpretation

From a utilization perspective, this is a CPU-heavy load profile. At 4K (Ultra HD) Low, the Core i7-2637M reaches 88% average load (85-90%), while the GeForce RTX 4090 remains comparatively lower at 57% (45-69%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 68% and GPU 65%. At 1440p, that shifts to CPU 68% and GPU 80%, and at 4K it reaches CPU 68% and GPU 78%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.

Optimal Settings Recommendation

4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 60% (54-67%) and GPU 88% (83-93%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i7-2637M remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Core i7-2637M and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

PUBG: BATTLEGROUNDS Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Core i7-2637M
cpu icon
1,889
Your Score
MinimumCore i5-4430
RecommendedCore i5-6600K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1060

Your hardware is below minimum requirements. CPU is the limiting factor (59% below minimum). Expect performance issues. Low settings recommended.

CPU

-85%vsrecommended

GPU

+279%vsrecommended

CPU

-59%vsminimum

GPU

+521%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-4430
Memory: 8 GB
Disk Space: 40 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1060
Processor: Core i5-6600K
Memory: 16 GB
Disk Space: 50 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Core i7-2637M and GeForce RTX 4090 run PUBG: BATTLEGROUNDS well?

The Core i7-2637M and GeForce RTX 4090 will struggle to run PUBG: BATTLEGROUNDS at smooth framerates. At 1080p Ultra, you can expect around 47 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.

2Is there a more cost-effective setup to run PUBG: BATTLEGROUNDS?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve PUBG: BATTLEGROUNDS performance?

For PUBG: BATTLEGROUNDS, upgrading the CPU would have the biggest impact on performance. The Core i7-2637M is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for PUBG: BATTLEGROUNDS?

PUBG: BATTLEGROUNDS does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for PUBG: BATTLEGROUNDS?

PUBG: BATTLEGROUNDS requires at minimum a Core i5-4430 (CPU) and GeForce GTX 960 (GPU) with 8 GB RAM and 40 GB storage. For the recommended experience, you need a Core i5-6600K and GeForce GTX 1060 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.

6How accurate are these PUBG: BATTLEGROUNDS FPS estimates for the Core i7-2637M and GeForce RTX 4090?

These PUBG: BATTLEGROUNDS FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.