A masterpiece of the RAGE engine, heavily taxing the GPU with volumetric lighting and water physics. Interestingly, it has relatively low CPU utilization compared to its graphical demands. Be prepared for a massive 150GB install size.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 96 FPS. At 1440p, all settings exceed 83 FPS. At 4K, frame rates range from 55 to 78 FPS.
The GeForce RTX 5090 is 286% above the recommended GPU (GeForce GTX 1060) for Red Dead Redemption 2. The Core i7-2840QM is 7% below minimum CPU requirement.
The Core i7-2840QM sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 5090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the Core i7-2840QM sets the ceiling at about 96 FPS, while the GeForce RTX 5090 could reach 377 FPS. In this scenario, the CPU limits the GPU potential by 75% (FPS gap: 281 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Core i7-2840QM is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 5090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 75% | CPU Limits GPU 70% | CPU Limits GPU 63% | CPU Limits GPU 56% |
| 1440p (2K QHD) | CPU Limits GPU 58% | CPU Limits GPU 52% | CPU Limits GPU 45% | CPU Limits GPU 40% |
| 4K (Ultra HD) | CPU Limits GPU 49% | CPU Limits GPU 46% | CPU Limits GPU 45% | CPU Limits GPU 40% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (7% below minimum). Expect performance issues. Low settings recommended.
-58%vsrecommended
+286%vsrecommended
-7%vsminimum
+552%vsminimum
Yes, the Core i7-2840QM paired with the GeForce RTX 5090 can run Red Dead Redemption 2 smoothly up to 1440p achieving around 83 FPS at Ultra quality. Your GPU is 286% above the recommended specs, and your CPU is 58% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Red Dead Redemption 2, upgrading the CPU would have the biggest impact on performance. The Core i7-2840QM is currently the limiting factor — the GeForce RTX 5090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Red Dead Redemption 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Red Dead Redemption 2 requires at minimum a Core i5-2500K (CPU) and GeForce GTX 770 (GPU) with 8 GB RAM and 150 GB storage. For the recommended experience, you need a Core i7-4770K and GeForce GTX 1060 with 12 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Red Dead Redemption 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
