The Java version is inefficient and single-thread bound, often bottlenecking on the CPU unless you use performance mods. The Bedrock edition is optimized in C++ and runs much better. For Java, the CPU is king.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 39 to 66 FPS depending on quality settings. At 1440p, frame rates range from 29 to 66 FPS. At 4K, frame rates range from 18 to 66 FPS.
The GeForce RTX 4090 is 1907% above the recommended GPU (GeForce 700 Series) for Minecraft. The Core i7-3687U is 18% below minimum CPU requirement.
The Core i7-3687U sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Core i7-3687U sets the ceiling at about 15 FPS, while the GeForce RTX 4090 could reach 113 FPS. In this scenario, the CPU limits the GPU potential by 87% (FPS gap: 98 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Core i7-3687U is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 84% | CPU Limits GPU 77% | CPU Limits GPU 62% | CPU Limits GPU 70% |
| 1440p (2K QHD) | CPU Limits GPU 82% | CPU Limits GPU 72% | CPU Limits GPU 55% | CPU Limits GPU 76% |
| 4K (Ultra HD) | CPU Limits GPU 78% | CPU Limits GPU 75% | CPU Limits GPU 78% | CPU Limits GPU 87% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU85% - 95% <> GPU34% - 42% <> | CPU85% - 95% <> GPU34% - 42% <> | CPU83% - 95% <> GPU38% - 55% <> | CPU84% - 95% <> GPU90% - 100% <> |
| 1440p (2K QHD) | CPU84% - 95% <> GPU34% - 42% <> | CPU84% - 95% <> GPU34% - 42% <> | CPU83% - 95% <> GPU38% - 55% <> | CPU84% - 95% <> GPU89% - 100% <> |
| 4K (Ultra HD) | CPU84% - 95% <> GPU34% - 42% <> | CPU84% - 95% <> GPU34% - 42% <> | CPU83% - 95% <> GPU38% - 55% <> | CPU83% - 95% <> GPU90% - 100% <> |
The Core i7-3687U + GeForce RTX 4090 pairing runs this title with CPU utilization between 83% and 95% and GPU utilization between 34% and 100%. Core i7-3687U reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 54% at 1080p to 54% at 4K, while CPU averages move from 90% to 90%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Core i7-3687U reaches 90% average load (85-95%), while the GeForce RTX 4090 remains comparatively lower at 38% (34-42%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 90% and GPU 54%. At 1440p, that shifts to CPU 90% and GPU 54%, and at 4K it reaches CPU 90% and GPU 54%. This shows that workload scaling is limited, which can indicate engine-side constraints.
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 89% (83-95%) and GPU 95% (90-100%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i7-3687U remains stable for consistent frame delivery.
Both components are stressed near their limits in the heaviest presets (Core i7-3687U: 90% avg, GeForce RTX 4090: 95% avg). A targeted upgrade should follow your target resolution: GPU first for higher image quality, CPU first for higher minimum FPS.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (18% below minimum). Expect performance issues. Low settings recommended.
-53%vsrecommended
+1907%vsrecommended
-18%vsminimum
+39600%vsminimum
The Core i7-3687U and GeForce RTX 4090 will struggle to run Minecraft at smooth framerates. At 1080p Ultra, you can expect around 39 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Minecraft, upgrading the CPU would have the biggest impact on performance. The Core i7-3687U is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Minecraft does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Minecraft requires at minimum a Core i3-3210 (CPU) and GeForce 400 Series (GPU) with 2 GB RAM and 1 GB storage. For the recommended experience, you need a Core i5-4690 and GeForce 700 Series with 4 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Minecraft FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
