Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 152 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 128 FPS. At 4K, all settings exceed 91 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Core i9-10900KF is 14% above the recommended CPU (Core i5-11600K).
Throne and Liberty supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4090.
The Core i9-10900KF sets the FPS ceiling at 1080p (low/medium), 1440p (low/medium), 4k (low/medium), while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1080p (high/ultra), 1440p (high/ultra), 4k (high/ultra).
Approximated average price on current market:
Combo price: $1985. At 1080p Ultra, this combo delivers 152 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.133 fps/$ | 0.112 fps/$ | 0.091 fps/$ | 0.077 fps/$ |
| 1440p | 0.102 fps/$ | 0.089 fps/$ | 0.075 fps/$ | 0.064 fps/$ |
| 4k | 0.084 fps/$ | 0.069 fps/$ | 0.053 fps/$ | 0.046 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Core i9-10900KF sets the ceiling at about 138 FPS, while the GeForce RTX 4090 could reach 157 FPS. In this scenario, the CPU limits the GPU potential by 12% (FPS gap: 19 FPS). Overall distribution: CPU limits 6/12 cells, GPU limits 0/12, balanced 6/12.
The Core i9-10900KF and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 8% | CPU Limits GPU 9% | Balanced | Balanced |
| 1440p (2K QHD) | CPU Limits GPU 11% | CPU Limits GPU 11% | Balanced | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 10% | CPU Limits GPU 12% | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 14% above and your GPU is 183% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+14%vsrecommended
+183%vsrecommended
+69%vsminimum
+521%vsminimum
Yes, the Core i9-10900KF paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 4k achieving around 91 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 14% above the recommended requirements.
This CPU + GPU combo costs approximately $1985 ($336 CPU (Rank #290 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Core i9-10900KF is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1440p low, 1440p medium, 4k low, 4k medium.
Throne and Liberty currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Core i9-10900KF and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
