Throne and LibertyFPS onCore i9-14901E&GeForce RTX 4090

Throne and Liberty

Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.

Throne and Liberty - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low313 FPS
medium269 FPS
high210 FPS
ultra178 FPS
1440P
low238 FPS
medium213 FPS
high172 FPS
ultra145 FPS
4K
low186 FPS
medium152 FPS
high115 FPS
ultra99 FPS

Performance Report

Throne and Liberty

GeForce RTX 4090 + Core i9-14901E
🎮Visual Experience

At 1080p, all quality settings exceed 178 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 145 FPS. At 4K, all settings exceed 99 FPS.

Official Requirements

The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Core i9-14901E is 55% above the recommended CPU (Core i5-11600K).

⚙️FPS Ceiling Analysis

The GeForce RTX 4090 sets the FPS ceiling at 1080p (medium/high/ultra), 1440p (medium/high/ultra), 4k ultra, while the Core i9-14901E still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p low, 1440p low, 4k (low/medium/high).

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
Core i9-14901E:$689(updated 2/6/2026)
Official Launch Price: $557

Combo price: $2338. At 1080p Ultra, this combo delivers 178 FPS, equivalent to 0.08 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.134 fps/$0.115 fps/$0.090 fps/$0.076 fps/$
1440p0.102 fps/$0.091 fps/$0.074 fps/$0.062 fps/$
4k0.080 fps/$0.065 fps/$0.049 fps/$0.042 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Core i9-14901E|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1440p ultra, the GeForce RTX 4090 sets the ceiling at about 127 FPS, while the Core i9-14901E has headroom up to 144 FPS. In this scenario, the GPU limits the CPU potential by 12% (FPS gap: 17 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 0/12, balanced 4/12.

Verdict

Well Balanced

The Core i9-14901E and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowBalanced
MediumGPU Limits CPU 7%
HighGPU Limits CPU 9%
UltraGPU Limits CPU 9%
1440p (2K QHD)
LowBalanced
MediumGPU Limits CPU 8%
HighGPU Limits CPU 11%
UltraGPU Limits CPU 12%
4K (Ultra HD)
LowBalanced
MediumBalanced
HighGPU Limits CPU 7%
UltraGPU Limits CPU 8%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Core i9-14901E and GeForce RTX 4090

1080p (Full HD)

Low
CPU55% - 62%
<>
GPU70% - 92%
<>
Medium
CPU50% - 66%
<>
GPU88% - 94%
<>
High
CPU50% - 66%
<>
GPU88% - 94%
<>
Ultra
CPU31% - 55%
<>
GPU87% - 94%
<>

1440p (2K QHD)

Low
CPU47% - 56%
<>
GPU71% - 92%
<>
Medium
CPU34% - 57%
<>
GPU91% - 95%
<>
High
CPU34% - 57%
<>
GPU91% - 95%
<>
Ultra
CPU15% - 46%
<>
GPU91% - 95%
<>

4K (Ultra HD)

Low
CPU48% - 69%
<>
GPU68% - 94%
<>
Medium
CPU39% - 70%
<>
GPU89% - 100%
<>
High
CPU39% - 70%
<>
GPU89% - 100%
<>
Ultra
CPU22% - 69%
<>
GPU89% - 100%
<>

Performance Summary

The Core i9-14901E + GeForce RTX 4090 pairing runs this title with CPU utilization between 15% and 70% and GPU utilization between 68% and 100%. Core i9-14901E keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 88% at 1080p to 91% at 4K, while CPU averages move from 54% to 53%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Medium, the GeForce RTX 4090 averages 94% usage (89-100%), while the Core i9-14901E stays at 54% (39-70%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 54% and GPU 88%. At 1440p, that shifts to CPU 44% and GPU 90%, and at 4K it reaches CPU 53% and GPU 91%. This shows that workload scaling is limited, which can indicate engine-side constraints.

Optimal Settings Recommendation

1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 43% (31-55%) and GPU 90% (87-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Core i9-14901E remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Core i9-14901E and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Throne and Liberty Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Core i9-14901E
cpu icon
30,298
Your Score
MinimumCore i5-7700
RecommendedCore i5-11600K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1660

Your CPU is 55% above and your GPU is 183% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+55%vsrecommended

GPU

+183%vsrecommended

CPU

+130%vsminimum

GPU

+521%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-7700
Memory: 16 GB
Disk Space: 63 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1660
Processor: Core i5-11600K
Memory: 16 GB
Disk Space: 63 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Core i9-14901E and GeForce RTX 4090 run Throne and Liberty well?

Yes, the Core i9-14901E paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 4k achieving around 99 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 55% above the recommended requirements.

2Is there a more cost-effective setup to run Throne and Liberty?

This CPU + GPU combo costs approximately $2338 ($689 CPU (Rank #362 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.

3Which component should I upgrade first to improve Throne and Liberty performance?

Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 1080p medium, 1080p high, 1080p ultra, 1440p medium, 1440p high, 1440p ultra, 4k ultra.

4Does this setup support Frame Generation for Throne and Liberty?

Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Throne and Liberty?

Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Core i9-14901E and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Throne and Liberty FPS estimates for the Core i9-14901E and GeForce RTX 4090?

These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.