This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 152 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 129 FPS. At 4K, all settings exceed 89 FPS.
The GeForce RTX 5090 is 140% above the recommended GPU (GeForce RTX 2070) for Palworld. The Core Ultra 7 265K is 162% above the recommended CPU (Core i9-9900K).
At lower resolutions (1080p (high/ultra), 1440p ultra, 4k ultra), the Core Ultra 7 265K sets the FPS ceiling. As graphical load increases at (1440p low), the GeForce RTX 5090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (low/medium), 1440p (medium/high), 4k (low/medium/high).
Approximated average price on current market:
Combo price: $2985. At 1080p Ultra, this combo delivers 152 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.077 fps/$ | 0.072 fps/$ | 0.058 fps/$ | 0.051 fps/$ |
| 1440p | 0.065 fps/$ | 0.061 fps/$ | 0.050 fps/$ | 0.043 fps/$ |
| 4k | 0.046 fps/$ | 0.043 fps/$ | 0.034 fps/$ | 0.030 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1440p low, the GeForce RTX 5090 sets the ceiling at about 207 FPS, while the Core Ultra 7 265K has headroom up to 224 FPS. In this scenario, the GPU limits the CPU potential by 8% (FPS gap: 17 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 0/12, balanced 4/12. Confidence is low because both ceilings are very close in this cell.
The Core Ultra 7 265K and GeForce RTX 5090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | Balanced |
| 1440p (2K QHD) | GPU Limits CPU 8% | GPU Limits CPU 8% | GPU Limits CPU 8% | GPU Limits CPU 8% |
| 4K (Ultra HD) | GPU Limits CPU 8% | GPU Limits CPU 8% | GPU Limits CPU 8% | GPU Limits CPU 8% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 162% above and your GPU is 140% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+162%vsrecommended
+140%vsrecommended
+660%vsminimum
+672%vsminimum
Yes, the Core Ultra 7 265K paired with the GeForce RTX 5090 can run Palworld smoothly up to 4k achieving around 89 FPS at Ultra quality. Your GPU is 140% above the recommended specs, and your CPU is 162% above the recommended requirements.
This CPU + GPU combo costs approximately $2985 ($285 CPU + $2700 GPU). Your Core Ultra 7 265K provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the Ryzen Threadripper 9970X is a great upgrade option for around $2499 (Rank #779 for value).
Your Core Ultra 7 265K is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Palworld performance right now. CPU fully utilized at: 1080p high, 1080p ultra, 1440p ultra, 4k ultra. GPU fully utilized at: 1440p low.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your Core Ultra 7 265K and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
