Red Dead Redemption 2
A masterpiece of the RAGE engine, heavily taxing the GPU with volumetric lighting and water physics. Interestingly, it has relatively low CPU utilization compared to its graphical demands. Be prepared for a massive 150GB install size.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 157 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 110 FPS. At 4K, all settings exceed 77 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Red Dead Redemption 2. The Core Ultra 7 265KF is 547% above the recommended CPU (Core i7-4770K).
The GeForce RTX 4090 sets the FPS ceiling at 1080p (medium/high/ultra), 1440p (medium/high/ultra), all 4k settings, while the Core Ultra 7 265KF still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p low, 1440p low.
Approximated average price on current market:
Combo price: $1972. At 1080p Ultra, this combo delivers 157 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.124 fps/$ | 0.111 fps/$ | 0.091 fps/$ | 0.080 fps/$ |
| 1440p | 0.083 fps/$ | 0.075 fps/$ | 0.066 fps/$ | 0.056 fps/$ |
| 4k | 0.062 fps/$ | 0.057 fps/$ | 0.050 fps/$ | 0.039 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is the GPU.
The largest gap appears at 1080p Ultra, where the GeForce RTX 4090 reaches about 151 FPS, while the Core Ultra 7 265KF still has headroom up to roughly 179 FPS.
That means the GeForce RTX 4090 is hitting its performance ceiling first, leaving a 16% gap versus the Core Ultra 7 265KF's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 10 out of 12 cases, with 0 CPU-limited and 2 balanced results.
Overall, this is a GPU-limited combination in this game.
The GeForce RTX 4090 is usually the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Core Ultra 7 265KF with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 4090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 547% above and your GPU is 279% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+547%vsrecommended
+279%vsrecommended
+1317%vsminimum
+539%vsminimum
Yes, the Core Ultra 7 265KF paired with the GeForce RTX 4090 can run Red Dead Redemption 2 smoothly up to 4k achieving around 77 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 547% above the recommended requirements.
This CPU + GPU combo costs approximately $1,972 ($323 CPU + $1,649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. In the Performance Limiter Analysis, it is still the side that most often reaches its FPS ceiling first, but there is no meaningful upgrade path that would drastically improve your Red Dead Redemption 2 performance right now. The main bottleneck appears on the GPU side. The largest gap shows up at 1080p Ultra, where the GPU reaches about 151 FPS while the CPU still has headroom up to roughly 179 FPS. Across all tested settings, the distribution is 10/12 GPU-limited, 0/12 CPU-limited, and 2/12 balanced.
Red Dead Redemption 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Red Dead Redemption 2 requires at minimum a Core i5-2500K (CPU) and GeForce GTX 770 (GPU) with 8 GB RAM and 150 GB storage. For the recommended experience, you need a Core i7-4770K and GeForce GTX 1060 with 12 GB RAM. Your Core Ultra 7 265KF and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Red Dead Redemption 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
