Throne and Liberty FPS on Core Ultra 9 285K + GeForce RTX 5090

Throne and Liberty

Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.

Throne and Liberty - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low350 FPS
medium316 FPS
high243 FPS
ultra212 FPS
1440P
low263 FPS
medium245 FPS
high193 FPS
ultra172 FPS
4K
low213 FPS
medium195 FPS
high145 FPS
ultra135 FPS

Performance Report

Throne and Liberty

GeForce RTX 5090 + Core Ultra 9 285K
🎮Visual Experience

At 1080p, all quality settings exceed 212 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 172 FPS. At 4K, all settings exceed 135 FPS.

Official Requirements

The GeForce RTX 5090 is 189% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Core Ultra 9 285K is 246% above the recommended CPU (Core i5-11600K).

⚙️FPS Ceiling Analysis

The GeForce RTX 5090 sets the FPS ceiling at 4k low, while the Core Ultra 9 285K still has additional frame-generation headroom. The FPS ceiling is closely matched at all 1080p settings, all 1440p settings, 4k (medium/high/ultra).

💰Value Analysis

Approximated average price on current market:

GeForce RTX 5090:$2700
Official Launch Price: $1999
Core Ultra 9 285K:$550
Official Launch Price: $589

Combo price: $3250. At 1080p Ultra, this combo delivers 212 FPS, equivalent to 0.07 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.108 fps/$0.097 fps/$0.075 fps/$0.065 fps/$
1440p0.081 fps/$0.075 fps/$0.059 fps/$0.053 fps/$
4k0.066 fps/$0.060 fps/$0.045 fps/$0.042 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Core Ultra 9 285K|GeForce RTX 5090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.

📈Analysis

At 1080p low, the GeForce RTX 5090 sets the ceiling at about 334 FPS, while the Core Ultra 9 285K has headroom up to 355 FPS. In this scenario, the GPU limits the CPU potential by 6% (FPS gap: 21 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12. Confidence is low because both ceilings are very close in this cell.

Verdict

Well Balanced

The Core Ultra 9 285K and GeForce RTX 5090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 6%
MediumGPU Limits CPU 6%
HighGPU Limits CPU 6%
UltraGPU Limits CPU 6%
1440p (2K QHD)
LowGPU Limits CPU 6%
MediumGPU Limits CPU 6%
HighGPU Limits CPU 6%
UltraGPU Limits CPU 6%
4K (Ultra HD)
LowGPU Limits CPU 6%
MediumGPU Limits CPU 6%
HighGPU Limits CPU 6%
UltraGPU Limits CPU 6%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.

Throne and Liberty Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Core Ultra 9 285K
cpu icon
67,482
Your Score
MinimumCore i5-7700
RecommendedCore i5-11600K
GPU - GeForce RTX 5090
gpu icon
38,867
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1660

Your CPU is 246% above and your GPU is 189% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+246%vsrecommended

GPU

+189%vsrecommended

CPU

+413%vsminimum

GPU

+534%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-7700
Memory: 16 GB
Disk Space: 63 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1660
Processor: Core i5-11600K
Memory: 16 GB
Disk Space: 63 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Core Ultra 9 285K and GeForce RTX 5090 run Throne and Liberty well?

Yes, the Core Ultra 9 285K paired with the GeForce RTX 5090 can run Throne and Liberty smoothly up to 4k achieving around 135 FPS at Ultra quality. Your GPU is 189% above the recommended specs, and your CPU is 246% above the recommended requirements.

2Is there a more cost-effective setup to run Throne and Liberty?

This CPU + GPU combo costs approximately $3250 ($550 CPU + $2700 GPU). Your GeForce RTX 5090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.

3Which component should I upgrade first to improve Throne and Liberty performance?

Your GeForce RTX 5090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 4k low.

4Does this setup support Frame Generation for Throne and Liberty?

Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Throne and Liberty?

Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Core Ultra 9 285K and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Throne and Liberty FPS estimates for the Core Ultra 9 285K and GeForce RTX 5090?

These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.