This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 10 to 28 FPS depending on quality settings. At 1440p, frame rates range from 9 to 21 FPS. At 4K, frame rates range from 4 to 10 FPS.
The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Palworld. The E2-3800 is 85% below minimum CPU requirement.
The GeForce RTX 4090 sets the FPS ceiling at 1080p (high/ultra), all 1440p settings, all 4k settings, while the E2-3800 still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p (low/medium).
Approximated average price on current market:
Combo price: $1669. At 1080p Ultra, this combo delivers 10 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.017 fps/$ | 0.011 fps/$ | 0.008 fps/$ | 0.006 fps/$ |
| 1440p | 0.013 fps/$ | 0.008 fps/$ | 0.007 fps/$ | 0.005 fps/$ |
| 4k | 0.006 fps/$ | 0.005 fps/$ | 0.003 fps/$ | 0.002 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce RTX 4090 sets the ceiling at about 4 FPS, while the E2-3800 has headroom up to 28 FPS. In this scenario, the GPU limits the CPU potential by 86% (FPS gap: 24 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 0/12, balanced 2/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the E2-3800 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | GPU Limits CPU 43% | GPU Limits CPU 61% |
| 1440p (2K QHD) | GPU Limits CPU 36% | GPU Limits CPU 50% | GPU Limits CPU 61% | GPU Limits CPU 68% |
| 4K (Ultra HD) | GPU Limits CPU 68% | GPU Limits CPU 75% | GPU Limits CPU 82% | GPU Limits CPU 86% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (85% below minimum). Expect performance issues. Low settings recommended.
-95%vsrecommended
+136%vsrecommended
-85%vsminimum
+657%vsminimum
The E2-3800 and GeForce RTX 4090 will struggle to run Palworld at smooth framerates. At 1080p Ultra, you can expect around 10 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1669 ($20 CPU + $1649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Palworld performance right now. GPU fully utilized at: 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
