A Source engine sandbox where performance depends entirely on the mods and contraptions you spawn. RAM errors are common on systems with only 4GB.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 515 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 466 FPS. At 4K, all settings exceed 324 FPS.
The GeForce RTX 5090 is 1074% above the recommended GPU (GeForce GTX 750) for Garry's Mod. The EPYC 4344P is 156% above the recommended CPU (Core i5).
The GeForce RTX 5090 sets the FPS ceiling at 1440p (low/medium/ultra), 4k low, while the EPYC 4344P still has additional frame-generation headroom. The FPS ceiling is closely matched at all 1080p settings, 1440p high, 4k (medium/high/ultra).
Approximated average price on current market:
Combo price: $3014. At 1080p Ultra, this combo delivers 515 FPS, equivalent to 0.17 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.218 fps/$ | 0.192 fps/$ | 0.181 fps/$ | 0.171 fps/$ |
| 1440p | 0.184 fps/$ | 0.174 fps/$ | 0.164 fps/$ | 0.155 fps/$ |
| 4k | 0.146 fps/$ | 0.136 fps/$ | 0.118 fps/$ | 0.107 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1440p low, the GeForce RTX 5090 sets the ceiling at about 551 FPS, while the EPYC 4344P has headroom up to 603 FPS. In this scenario, the GPU limits the CPU potential by 9% (FPS gap: 52 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 0/12, balanced 4/12.
The EPYC 4344P and GeForce RTX 5090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | Balanced |
| 1440p (2K QHD) | GPU Limits CPU 9% | GPU Limits CPU 9% | GPU Limits CPU 9% | GPU Limits CPU 9% |
| 4K (Ultra HD) | GPU Limits CPU 9% | GPU Limits CPU 9% | GPU Limits CPU 9% | GPU Limits CPU 9% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 156% above and your GPU is 1074% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+156%vsrecommended
+1074%vsrecommended
+1027%vsminimum
+11678%vsminimum
Yes, the EPYC 4344P paired with the GeForce RTX 5090 can run Garry's Mod smoothly up to 4k achieving around 324 FPS at Ultra quality. Your GPU is 1074% above the recommended specs, and your CPU is 156% above the recommended requirements.
This CPU + GPU combo costs approximately $3014 ($314 CPU + $2700 GPU). Your GeForce RTX 5090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 5090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Garry's Mod performance right now. GPU fully utilized at: 1440p low, 1440p medium, 1440p ultra, 4k low.
Garry's Mod does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Garry's Mod requires at minimum a Pentium 4 (CPU) and GeForce 6 series (GPU) with 4 GB RAM and 5 GB storage. For the recommended experience, you need a Core i5 and GeForce GTX 750 with 8 GB RAM. Your EPYC 4344P and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Garry's Mod FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
