Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 156 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 139 FPS. At 4K, all settings exceed 108 FPS.
The GeForce RTX 5090 is 189% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The EPYC 4344P is 73% above the recommended CPU (Core i5-11600K).
The EPYC 4344P sets the FPS ceiling at 1080p (low/medium/ultra), 1440p (low/medium/ultra), all 4k settings, while the GeForce RTX 5090 still has headroom. The FPS ceiling is closely matched at 1080p high, 1440p high.
Approximated average price on current market:
Combo price: $3014. At 1080p Ultra, this combo delivers 156 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.087 fps/$ | 0.077 fps/$ | 0.063 fps/$ | 0.052 fps/$ |
| 1440p | 0.075 fps/$ | 0.067 fps/$ | 0.055 fps/$ | 0.046 fps/$ |
| 4k | 0.061 fps/$ | 0.053 fps/$ | 0.041 fps/$ | 0.036 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the EPYC 4344P sets the ceiling at about 280 FPS, while the GeForce RTX 5090 could reach 333 FPS. In this scenario, the CPU limits the GPU potential by 16% (FPS gap: 53 FPS). Overall distribution: CPU limits 6/12 cells, GPU limits 0/12, balanced 6/12.
Your EPYC 4344P is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 5090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 16% | CPU Limits GPU 13% | Balanced | Balanced |
| 1440p (2K QHD) | CPU Limits GPU 8% | CPU Limits GPU 8% | Balanced | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 7% | CPU Limits GPU 7% | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 73% above and your GPU is 189% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+73%vsrecommended
+189%vsrecommended
+157%vsminimum
+534%vsminimum
Yes, the EPYC 4344P paired with the GeForce RTX 5090 can run Throne and Liberty smoothly up to 4k achieving around 108 FPS at Ultra quality. Your GPU is 189% above the recommended specs, and your CPU is 73% above the recommended requirements.
This CPU + GPU combo costs approximately $3014 ($314 CPU + $2700 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the EPYC 9375F is a great upgrade option for around $5306 (Rank #5 for value).
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The EPYC 4344P is currently the limiting factor — the GeForce RTX 5090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p ultra, 1440p low, 1440p medium, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your EPYC 4344P and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
