Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.
This game has a built-in FPS cap of 300 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 271 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 249 FPS. At 4K, all settings exceed 134 FPS.
The GeForce RTX 4090 is 295% above the recommended GPU (GeForce GTX 970) for Apex Legends. The EPYC 7351P is 174% above the recommended CPU (Core i5-3570K).
The GeForce RTX 4090 determines the performance ceiling at all 1440p settings, all 4k settings, executing at maximum capacity. The system is well balanced at all 1080p settings.
At 4k low, the GeForce RTX 4090 sets the ceiling at about 160 FPS, while the EPYC 7351P has headroom up to 203 FPS. In this scenario, the GPU limits the CPU potential by 21% (FPS gap: 43 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 0/12, balanced 4/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the EPYC 7351P frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | Balanced |
| 1440p (2K QHD) | GPU Limits CPU 17% | GPU Limits CPU 11% | GPU Limits CPU 14% | GPU Limits CPU 13% |
| 4K (Ultra HD) | GPU Limits CPU 21% | GPU Limits CPU 20% | GPU Limits CPU 21% | GPU Limits CPU 19% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU28% - 48% <> GPU61% - 84% <> | CPU27% - 48% <> GPU88% - 97% <> | CPU28% - 48% <> GPU88% - 97% <> | CPU27% - 47% <> GPU90% - 97% <> |
| 1440p (2K QHD) | CPU27% - 46% <> GPU62% - 84% <> | CPU26% - 46% <> GPU91% - 97% <> | CPU27% - 46% <> GPU91% - 97% <> | CPU26% - 47% <> GPU91% - 97% <> |
| 4K (Ultra HD) | CPU26% - 46% <> GPU62% - 85% <> | CPU25% - 45% <> GPU92% - 98% <> | CPU26% - 45% <> GPU92% - 98% <> | CPU25% - 47% <> GPU92% - 98% <> |
The EPYC 7351P + GeForce RTX 4090 pairing runs this title with CPU utilization between 25% and 48% and GPU utilization between 61% and 98%. EPYC 7351P keeps significant headroom across presets, while GeForce RTX 4090 becomes the primary limiter at high visual load. As resolution scales, average GPU load rises from 88% at 1080p to 90% at 4K, while CPU averages move from 38% to 36%.
This profile is GPU-bound. At 4K (Ultra HD) Medium, the GeForce RTX 4090 averages 95% usage (92-98%), while the EPYC 7351P stays at 35% (25-45%), indicating the graphics pipeline is the limiting stage.
At 1080p, averages sit around CPU 38% and GPU 88%. At 1440p, that shifts to CPU 36% and GPU 89%, and at 4K it reaches CPU 36% and GPU 90%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Medium is the most balanced preset based on this dataset. It runs around CPU 38% (27-48%) and GPU 92% (88-97%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 7351P remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 95% average load at 4K (Ultra HD) Medium while the EPYC 7351P still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 174% above and your GPU is 295% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+174%vsrecommended
+295%vsrecommended
+474%vsminimum
+3160%vsminimum
Yes, the EPYC 7351P paired with the GeForce RTX 4090 can run Apex Legends smoothly up to 4k achieving around 134 FPS at Ultra quality. Your GPU is 295% above the recommended specs, and your CPU is 174% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Apex Legends performance right now. GPU fully utilized at: 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your EPYC 7351P and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
