RustFPS onEPYC 7351P&GeForce RTX 4090

Rust

A true test for system memory. Procedural maps can exhaust RAM quickly; 16GB is the minimum, and 32GB is recommended. CPUs with 3D V-Cache (AMD X3D) offer massive performance gains here.

Rust - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low157 FPS
medium142 FPS
high124 FPS
ultra98 FPS
1440P
low126 FPS
medium110 FPS
high93 FPS
ultra76 FPS
4K
low63 FPS
medium56 FPS
high50 FPS
ultra36 FPS

Performance Report

Rust

GeForce RTX 4090 + EPYC 7351P
🎮Visual Experience

At 1080p, all quality settings exceed 98 FPS. At 1440p, all settings exceed 76 FPS. At 4K, frame rates range from 36 to 63 FPS.

Official Requirements

The GeForce RTX 4090 is 244% above the recommended GPU (GeForce GTX 980) for Rust. The EPYC 7351P is 103% above the recommended CPU (Core i7-4790K).

⚙️Bottleneck Analysis

The EPYC 7351P determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GPU has headroom.

Performance Limiter Analysis

EPYC 7351P|GeForce RTX 4090
📈Analysis

At 4k low, the EPYC 7351P sets the ceiling at about 62 FPS, while the GeForce RTX 4090 could reach 160 FPS. In this scenario, the CPU limits the GPU potential by 61% (FPS gap: 98 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your EPYC 7351P is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 39%
MediumCPU Limits GPU 38%
HighCPU Limits GPU 32%
UltraCPU Limits GPU 38%
1440p (2K QHD)
LowCPU Limits GPU 48%
MediumCPU Limits GPU 48%
HighCPU Limits GPU 40%
UltraCPU Limits GPU 40%
4K (Ultra HD)
LowCPU Limits GPU 61%
MediumCPU Limits GPU 61%
HighCPU Limits GPU 57%
UltraCPU Limits GPU 59%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for EPYC 7351P and GeForce RTX 4090

1080p (Full HD)

Low
CPU24% - 30%
<>
GPU69% - 75%
<>
Medium
CPU24% - 31%
<>
GPU73% - 75%
<>
High
CPU23% - 30%
<>
GPU79% - 84%
<>
Ultra
CPU30% - 47%
<>
GPU77% - 83%
<>

1440p (2K QHD)

Low
CPU24% - 30%
<>
GPU69% - 76%
<>
Medium
CPU24% - 31%
<>
GPU73% - 76%
<>
High
CPU23% - 30%
<>
GPU81% - 83%
<>
Ultra
CPU30% - 47%
<>
GPU78% - 82%
<>

4K (Ultra HD)

Low
CPU24% - 31%
<>
GPU74% - 95%
<>
Medium
CPU23% - 32%
<>
GPU78% - 93%
<>
High
CPU23% - 31%
<>
GPU90% - 97%
<>
Ultra
CPU26% - 43%
<>
GPU90% - 97%
<>

Performance Summary

The EPYC 7351P + GeForce RTX 4090 pairing runs this title with CPU utilization between 23% and 47% and GPU utilization between 69% and 97%. EPYC 7351P keeps significant headroom across presets, while GeForce RTX 4090 becomes the primary limiter at high visual load. As resolution scales, average GPU load rises from 77% at 1080p to 90% at 4K, while CPU averages move from 30% to 29%.

Bottleneck Analysis

This profile is GPU-bound. At 4K (Ultra HD) High, the GeForce RTX 4090 averages 94% usage (90-97%), while the EPYC 7351P stays at 27% (23-31%), indicating the graphics pipeline is the limiting stage.

Resolution Scaling

At 1080p, averages sit around CPU 30% and GPU 77%. At 1440p, that shifts to CPU 30% and GPU 77%, and at 4K it reaches CPU 29% and GPU 90%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.

Optimal Settings Recommendation

4K (Ultra HD) Medium is the most balanced preset based on this dataset. It runs around CPU 28% (23-32%) and GPU 86% (78-93%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 7351P remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the EPYC 7351P and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.

  • The Ideal Scenario (GPU Bottleneck): You typically want to see High GPU Utilization (90%+) and moderate CPU usage. This indicates your system is successfully pushing out graphics as fast as it can, without being held back by the CPU.
  • CPU Bottleneck: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the CPU is struggling to compute game logic and prepare frames fast enough. The GPU sits waiting, often resulting in stuttering, inconsistent frame times, and lower overall FPS.
  • Engine Limits or Capped FPS: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Rust Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - EPYC 7351P
cpu icon
24,871
Your Score
MinimumCore i7-3770
RecommendedCore i7-4790K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 670
RecommendedGeForce GTX 980

Your CPU is 103% above and your GPU is 244% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+103%vsrecommended

GPU

+244%vsrecommended

CPU

+144%vsminimum

GPU

+589%vsminimum

Minimum Requirements
Video Card: GeForce GTX 670
Processor: Core i7-3770
Memory: 10 GB
Disk Space: 25 GB (SSD)
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 980
Processor: Core i7-4790K
Memory: 16 GB
Disk Space: 25 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the EPYC 7351P and GeForce RTX 4090 run Rust well?

Yes, the EPYC 7351P paired with the GeForce RTX 4090 can run Rust smoothly up to 1440p achieving around 76 FPS at Ultra quality. Your GPU is 244% above the recommended specs, and your CPU is 103% above the recommended requirements.

2Is there a more cost-effective setup to run Rust?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Rust performance?

For Rust, upgrading the CPU would have the biggest impact on performance. The EPYC 7351P is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Rust?

Rust does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Rust?

Rust requires at minimum a Core i7-3770 (CPU) and GeForce GTX 670 (GPU) with 10 GB RAM and 25 GB (SSD) storage. For the recommended experience, you need a Core i7-4790K and GeForce GTX 980 with 16 GB RAM. Your EPYC 7351P and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Rust FPS estimates for the EPYC 7351P and GeForce RTX 4090?

These Rust FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.