Extremely accessible and runs on almost anything. It is single-threaded with negligible GPU load. However, installing many mods can increase RAM usage to 2-4GB.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 210 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 116 FPS. At 4K, all settings exceed 104 FPS.
The GeForce RTX 4090 is 1575% above the recommended GPU (GeForce GTX 460) for Stardew Valley. The EPYC 7351P is 88% above the recommended CPU (Core i3).
The GeForce RTX 4090 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, executing at maximum capacity.
At 1080p low, the GeForce RTX 4090 sets the ceiling at about 152 FPS, while the EPYC 7351P has headroom up to 275 FPS. In this scenario, the GPU limits the CPU potential by 45% (FPS gap: 123 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the EPYC 7351P frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 45% | GPU Limits CPU 45% | GPU Limits CPU 43% | GPU Limits CPU 35% |
| 1440p (2K QHD) | GPU Limits CPU 29% | GPU Limits CPU 28% | GPU Limits CPU 27% | GPU Limits CPU 21% |
| 4K (Ultra HD) | GPU Limits CPU 29% | GPU Limits CPU 27% | GPU Limits CPU 27% | GPU Limits CPU 21% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU43% - 53% <> GPU0% - 0% | CPU43% - 53% <> GPU0% - 0% | CPU43% - 53% <> GPU0% - 0% | CPU25% - 44% <> GPU0% - 0% |
| 1440p (2K QHD) | CPU43% - 51% <> GPU0% - 0% | CPU43% - 51% <> GPU0% - 0% | CPU43% - 51% <> GPU0% - 0% | CPU25% - 41% <> GPU0% - 0% |
| 4K (Ultra HD) | CPU43% - 50% <> GPU1% - 5% <> | CPU43% - 50% <> GPU1% - 5% <> | CPU43% - 50% <> GPU1% - 5% <> | CPU25% - 41% <> GPU1% - 5% <> |
The EPYC 7351P + GeForce RTX 4090 pairing runs this title with CPU utilization between 25% and 53% and GPU utilization between 0% and 5%. EPYC 7351P keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 0% at 1080p to 3% at 4K, while CPU averages move from 45% to 43%.
Neither component is close to saturation: CPU tops out at 53% and GPU at 5%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput.
At 1080p, averages sit around CPU 45% and GPU 0%. At 1440p, that shifts to CPU 44% and GPU 0%, and at 4K it reaches CPU 43% and GPU 3%. This shows that workload scaling is limited, which can indicate engine-side constraints.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 46% (43-50%) and GPU 3% (1-5%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 7351P remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the EPYC 7351P and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 88% above and your GPU is 1575% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+88%vsrecommended
+1575%vsrecommended
+1035%vsminimum
+26004%vsminimum
Yes, the EPYC 7351P paired with the GeForce RTX 4090 can run Stardew Valley smoothly up to 4k achieving around 104 FPS at Ultra quality. Your GPU is 1575% above the recommended specs, and your CPU is 88% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Stardew Valley performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Stardew Valley does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Stardew Valley requires at minimum a Core 2 Duo (CPU) and GeForce 7 series (GPU) with 2 GB RAM and 500 MB storage. For the recommended experience, you need a Core i3 and GeForce GTX 460 with 4 GB RAM. Your EPYC 7351P and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Stardew Valley FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
