Team Fortress 2FPS onEPYC 7351P&GeForce RTX 4090

Team Fortress 2

A Valve classic that depends heavily on single-thread clock speed. It runs well on older hardware but benefits from a fast CPU.

Team Fortress 2 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low602 FPS
medium520 FPS
high464 FPS
ultra375 FPS
1440P
low557 FPS
medium525 FPS
high493 FPS
ultra383 FPS
4K
low476 FPS
medium432 FPS
high410 FPS
ultra320 FPS

Performance Report

Team Fortress 2

GeForce RTX 4090 + EPYC 7351P
🎮Visual Experience

At 1080p, all quality settings exceed 375 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 383 FPS. At 4K, all settings exceed 320 FPS.

Official Requirements

The GeForce RTX 4090 is 13367% above the recommended GPU (GeForce 8600 GT) for Team Fortress 2. The EPYC 7351P is 1035% above the recommended CPU (Core 2 Duo).

⚙️Bottleneck Analysis

The EPYC 7351P determines the performance ceiling at all 1080p settings, 1440p (low/medium/ultra), all 4k settings, while the GPU has headroom. The system is well balanced at 1440p high.

Performance Limiter Analysis

EPYC 7351P|GeForce RTX 4090
📈Analysis

At 4k low, the EPYC 7351P sets the ceiling at about 462 FPS, while the GeForce RTX 4090 could reach 700 FPS. In this scenario, the CPU limits the GPU potential by 34% (FPS gap: 238 FPS). Overall distribution: CPU limits 11/12 cells, GPU limits 0/12, balanced 1/12.

Verdict

CPU Limits GPU

Your EPYC 7351P is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 14%
MediumCPU Limits GPU 13%
HighCPU Limits GPU 7%
UltraCPU Limits GPU 17%
1440p (2K QHD)
LowCPU Limits GPU 23%
MediumCPU Limits GPU 15%
HighBalanced
UltraCPU Limits GPU 17%
4K (Ultra HD)
LowCPU Limits GPU 34%
MediumCPU Limits GPU 30%
HighCPU Limits GPU 20%
UltraCPU Limits GPU 28%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for EPYC 7351P and GeForce RTX 4090

1080p (Full HD)

Low
CPU36% - 43%
<>
GPU0% - 12%
<>
Medium
CPU10% - 25%
<>
GPU1% - 14%
<>
High
CPU10% - 31%
<>
GPU7% - 22%
<>
Ultra
CPU17% - 40%
<>
GPU12% - 26%
<>

1440p (2K QHD)

Low
CPU34% - 35%
<>
GPU15% - 27%
<>
Medium
CPU8% - 17%
<>
GPU20% - 30%
<>
High
CPU8% - 21%
<>
GPU23% - 35%
<>
Ultra
CPU14% - 19%
<>
GPU27% - 38%
<>

4K (Ultra HD)

Low
CPU34% - 35%
<>
GPU31% - 43%
<>
Medium
CPU7% - 18%
<>
GPU37% - 48%
<>
High
CPU7% - 18%
<>
GPU39% - 52%
<>
Ultra
CPU9% - 17%
<>
GPU42% - 56%
<>

Performance Summary

The EPYC 7351P + GeForce RTX 4090 pairing runs this title with CPU utilization between 7% and 43% and GPU utilization between 0% and 56%. EPYC 7351P keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 12% at 1080p to 44% at 4K, while CPU averages move from 27% to 18%.

Bottleneck Analysis

Neither component is close to saturation: CPU tops out at 43% and GPU at 56%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput.

Resolution Scaling

At 1080p, averages sit around CPU 27% and GPU 12%. At 1440p, that shifts to CPU 19% and GPU 27%, and at 4K it reaches CPU 18% and GPU 44%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 13% (9-17%) and GPU 49% (42-56%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 7351P remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the EPYC 7351P and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.

  • The Ideal Scenario (GPU Bottleneck): You typically want to see High GPU Utilization (90%+) and moderate CPU usage. This indicates your system is successfully pushing out graphics as fast as it can, without being held back by the CPU.
  • CPU Bottleneck: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the CPU is struggling to compute game logic and prepare frames fast enough. The GPU sits waiting, often resulting in stuttering, inconsistent frame times, and lower overall FPS.
  • Engine Limits or Capped FPS: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Team Fortress 2 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - EPYC 7351P
cpu icon
24,871
Your Score
MinimumPentium 4 (3.0 GHz)
RecommendedCore 2 Duo
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce 6 series
RecommendedGeForce 8600 GT

Your CPU is 1035% above and your GPU is 13367% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+1035%vsrecommended

GPU

+13367%vsrecommended

CPU

+729%vsminimum

GPU

+2422%vsminimum

Minimum Requirements
Video Card: GeForce 6 series
Memory: 1 GB
Disk Space: 15 GB
System: Windows 7
Recommended Requirements
Video Card: GeForce 8600 GT
Processor: Core 2 Duo
Memory: 2 GB
Disk Space: 15 GB
System: Windows 10

Frequently Asked Questions

1Can the EPYC 7351P and GeForce RTX 4090 run Team Fortress 2 well?

Yes, the EPYC 7351P paired with the GeForce RTX 4090 can run Team Fortress 2 smoothly up to 4k achieving around 320 FPS at Ultra quality. Your GPU is 13367% above the recommended specs, and your CPU is 1035% above the recommended requirements.

2Is there a more cost-effective setup to run Team Fortress 2?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Team Fortress 2 performance?

For Team Fortress 2, upgrading the CPU would have the biggest impact on performance. The EPYC 7351P is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Team Fortress 2?

Team Fortress 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Team Fortress 2?

Team Fortress 2 requires at minimum a Pentium 4 (3.0 GHz) (CPU) and GeForce 6 series (GPU) with 1 GB RAM and 15 GB storage. For the recommended experience, you need a Core 2 Duo and GeForce 8600 GT with 2 GB RAM. Your EPYC 7351P and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Team Fortress 2 FPS estimates for the EPYC 7351P and GeForce RTX 4090?

These Team Fortress 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.