The transition from Global Offensive to Counter-Strike 2 marked the end of the DX9 era for Valve. The new Source 2 engine introduces physically based rendering and dynamic smoke that interacts with lighting, significantly changing the performance profile. While CS:GO was light on the GPU, CS2 requires a competent card to handle these effects without stuttering. It remains CPU-heavy at competitive settings, where the 'sub-tick' server architecture demands strong single-thread performance. CPUs with large L3 caches, like AMD's X3D line, offer a major advantage. 8GB of RAM is now the absolute minimum, though more is recommended to avoid hitches.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 166 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 156 FPS. At 4K, all settings exceed 131 FPS.
The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Counter-Strike 2. The EPYC 7401 is 217% above the recommended CPU (Core i7-9700K).
The EPYC 7401 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $2099. At 1080p Ultra, this combo delivers 166 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.114 fps/$ | 0.102 fps/$ | 0.088 fps/$ | 0.079 fps/$ |
| 1440p | 0.112 fps/$ | 0.103 fps/$ | 0.088 fps/$ | 0.074 fps/$ |
| 4k | 0.092 fps/$ | 0.088 fps/$ | 0.073 fps/$ | 0.062 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the EPYC 7401 sets the ceiling at about 239 FPS, while the GeForce RTX 4090 could reach 535 FPS. In this scenario, the CPU limits the GPU potential by 55% (FPS gap: 296 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your EPYC 7401 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 55% | CPU Limits GPU 55% | CPU Limits GPU 54% | CPU Limits GPU 52% |
| 1440p (2K QHD) | CPU Limits GPU 53% | CPU Limits GPU 51% | CPU Limits GPU 53% | CPU Limits GPU 52% |
| 4K (Ultra HD) | CPU Limits GPU 46% | CPU Limits GPU 47% | CPU Limits GPU 50% | CPU Limits GPU 50% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU41% - 82% <> GPU20% - 36% <> | CPU40% - 79% <> GPU27% - 51% <> | CPU38% - 75% <> GPU30% - 52% <> | CPU39% - 70% <> GPU29% - 53% <> |
| 1440p (2K QHD) | CPU28% - 44% <> GPU47% - 47% | CPU24% - 43% <> GPU56% - 84% <> | CPU21% - 41% <> GPU59% - 88% <> | CPU22% - 38% <> GPU60% - 89% <> |
| 4K (Ultra HD) | CPU25% - 33% <> GPU46% - 77% <> | CPU24% - 31% <> GPU70% - 86% <> | CPU21% - 30% <> GPU70% - 88% <> | CPU22% - 30% <> GPU69% - 88% <> |
The EPYC 7401 + GeForce RTX 4090 pairing runs this title with CPU utilization between 21% and 82% and GPU utilization between 20% and 89%. EPYC 7401 stays in a controlled operating range, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 37% at 1080p to 74% at 4K, while CPU averages move from 58% to 27%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 79% average at its highest-load preset, while the EPYC 7401 peaks at 62% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 58% and GPU 37%. At 1440p, that shifts to CPU 33% and GPU 66%, and at 4K it reaches CPU 27% and GPU 74%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 26% (21-30%) and GPU 79% (70-88%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 7401 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the EPYC 7401 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 217% above and your GPU is 136% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+217%vsrecommended
+136%vsrecommended
+2071%vsminimum
+843%vsminimum
Yes, the EPYC 7401 paired with the GeForce RTX 4090 can run Counter-Strike 2 smoothly up to 4k achieving around 131 FPS at Ultra quality. Your GPU is 136% above the recommended specs, and your CPU is 217% above the recommended requirements.
This CPU + GPU combo costs approximately $2099 ($450 CPU (Rank #271 Value) + $1649 GPU (Rank #77 Value)). Your EPYC 7401 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the EPYC 4585PX is a great upgrade option for around $699 (Rank #66 for value).
Your EPYC 7401 is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Counter-Strike 2 performance right now. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Counter-Strike 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Counter-Strike 2 requires at minimum a Core i5 750 (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 85 GB storage. For the recommended experience, you need a Core i7-9700K and GeForce RTX 2070 with 16 GB RAM. Your EPYC 7401 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Counter-Strike 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
