A deceptively heavy isometric survival game. Its Java-based engine relies heavily on CPU and RAM for zombie AI and simulation. 8GB of RAM is the minimum for late-game scenarios or multiplayer.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 141 FPS. At 1440p, all settings exceed 147 FPS. At 4K, all settings exceed 99 FPS.
The GeForce RTX 4090 is 1051% above the recommended GPU (GeForce GTX 750) for Project Zomboid. The EPYC 7452 is 614% above the recommended CPU (Core i5-4460).
The EPYC 7452 sets the FPS ceiling at all 1080p settings, all 1440p settings, 4k (medium/high), while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 4k (low/ultra).
Approximated average price on current market:
Combo price: $3674. At 1080p Ultra, this combo delivers 141 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.073 fps/$ | 0.062 fps/$ | 0.047 fps/$ | 0.038 fps/$ |
| 1440p | 0.083 fps/$ | 0.074 fps/$ | 0.052 fps/$ | 0.040 fps/$ |
| 4k | 0.070 fps/$ | 0.054 fps/$ | 0.037 fps/$ | 0.027 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the EPYC 7452 sets the ceiling at about 172 FPS, while the GeForce RTX 4090 could reach 199 FPS. In this scenario, the CPU limits the GPU potential by 14% (FPS gap: 27 FPS). Overall distribution: CPU limits 10/12 cells, GPU limits 0/12, balanced 2/12.
The EPYC 7452 and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 10% | CPU Limits GPU 13% | CPU Limits GPU 14% | CPU Limits GPU 11% |
| 1440p (2K QHD) | CPU Limits GPU 11% | CPU Limits GPU 14% | CPU Limits GPU 14% | CPU Limits GPU 9% |
| 4K (Ultra HD) | Balanced | CPU Limits GPU 8% | CPU Limits GPU 11% | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 614% above and your GPU is 1051% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+614%vsrecommended
+1051%vsrecommended
+1920%vsminimum
+2422%vsminimum
Yes, the EPYC 7452 paired with the GeForce RTX 4090 can run Project Zomboid smoothly up to 4k achieving around 99 FPS at Ultra quality. Your GPU is 1051% above the recommended specs, and your CPU is 614% above the recommended requirements.
This CPU + GPU combo costs approximately $3674 ($2025 CPU (Rank #353 Value) + $1649 GPU (Rank #77 Value)). Your EPYC 7452 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the EPYC 4585PX is a great upgrade option for around $699 (Rank #66 for value) while costing less than your current CPU.
Your EPYC 7452 is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Project Zomboid performance right now. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k medium, 4k high.
Project Zomboid does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Project Zomboid requires at minimum a Core 2 Quad Q6600 (CPU) and GeForce 6600 (GPU) with 8 GB RAM and 5 GB storage. For the recommended experience, you need a Core i5-4460 and GeForce GTX 750 with 8 GB RAM. Your EPYC 7452 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Project Zomboid FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
