A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 341 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 234 FPS. At 4K, all settings exceed 151 FPS.
The GeForce RTX 5090 is 136% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The EPYC 8324P is 162% above the recommended CPU (Core i5-10400).
At lower resolutions (1440p (low/high/ultra), all 4k settings), the EPYC 8324P sets the FPS ceiling. As graphical load increases at (1080p medium), the GeForce RTX 5090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (low/high/ultra), 1440p medium.
Approximated average price on current market:
Combo price: $6298. At 1080p Ultra, this combo delivers 341 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.100 fps/$ | 0.086 fps/$ | 0.070 fps/$ | 0.054 fps/$ |
| 1440p | 0.062 fps/$ | 0.054 fps/$ | 0.045 fps/$ | 0.037 fps/$ |
| 4k | 0.037 fps/$ | 0.033 fps/$ | 0.028 fps/$ | 0.024 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p medium, the GeForce RTX 5090 sets the ceiling at about 517 FPS, while the EPYC 8324P has headroom up to 551 FPS. In this scenario, the GPU limits the CPU potential by 6% (FPS gap: 34 FPS). Overall distribution: GPU limits 9/12 cells, CPU limits 0/12, balanced 3/12. Confidence is low because both ceilings are very close in this cell.
The EPYC 8324P and GeForce RTX 5090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 6% | GPU Limits CPU 6% | GPU Limits CPU 6% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 6% | GPU Limits CPU 6% | GPU Limits CPU 6% |
| 4K (Ultra HD) | Balanced | GPU Limits CPU 6% | GPU Limits CPU 6% | GPU Limits CPU 6% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 162% above and your GPU is 136% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+162%vsrecommended
+136%vsrecommended
+339%vsminimum
+286%vsminimum
Yes, the EPYC 8324P paired with the GeForce RTX 5090 can run Marvel Rivals smoothly up to 4k achieving around 151 FPS at Ultra quality. Your GPU is 136% above the recommended specs, and your CPU is 162% above the recommended requirements.
This CPU + GPU combo costs approximately $6298 ($3598 CPU + $2700 GPU). Your EPYC 8324P provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the EPYC 9375F is a great upgrade option for around $5306 (Rank #5 for value).
Your EPYC 8324P is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Marvel Rivals performance right now. CPU fully utilized at: 1440p low, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. GPU fully utilized at: 1080p medium.
Marvel Rivals does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your EPYC 8324P and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
