Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 58 to 68 FPS depending on quality settings. At 1440p, frame rates range from 50 to 56 FPS. At 4K, frame rates range from 42 to 52 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The EPYC 9015 is 11% below recommended, but 131% above minimum.
The EPYC 9015 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GPU has headroom.
At 1080p high, the EPYC 9015 sets the ceiling at about 58 FPS, while the GeForce RTX 4090 could reach 144 FPS. In this scenario, the CPU limits the GPU potential by 60% (FPS gap: 86 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your EPYC 9015 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 51% | CPU Limits GPU 56% | CPU Limits GPU 60% | CPU Limits GPU 60% |
| 1440p (2K QHD) | CPU Limits GPU 48% | CPU Limits GPU 52% | CPU Limits GPU 53% | CPU Limits GPU 53% |
| 4K (Ultra HD) | CPU Limits GPU 50% | CPU Limits GPU 54% | CPU Limits GPU 53% | CPU Limits GPU 53% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU29% - 35% <> GPU18% - 35% <> | CPU29% - 35% <> GPU18% - 35% <> | CPU29% - 35% <> GPU18% - 35% <> | CPU15% - 19% <> GPU17% - 34% <> |
| 1440p (2K QHD) | CPU29% - 35% <> GPU37% - 49% <> | CPU29% - 35% <> GPU37% - 49% <> | CPU29% - 35% <> GPU37% - 49% <> | CPU15% - 19% <> GPU37% - 48% <> |
| 4K (Ultra HD) | CPU28% - 36% <> GPU53% - 72% <> | CPU28% - 36% <> GPU53% - 72% <> | CPU28% - 36% <> GPU53% - 72% <> | CPU14% - 21% <> GPU53% - 72% <> |
The EPYC 9015 + GeForce RTX 4090 pairing runs this title with CPU utilization between 14% and 36% and GPU utilization between 17% and 72%. EPYC 9015 keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 26% at 1080p to 62% at 4K, while CPU averages move from 28% to 29%.
The utilization pattern is relatively balanced. The GeForce RTX 4090 reaches 62% average at its highest-load preset, while the EPYC 9015 peaks at 32% average, with no single component consistently acting as a hard bottleneck.
At 1080p, averages sit around CPU 28% and GPU 26%. At 1440p, that shifts to CPU 28% and GPU 43%, and at 4K it reaches CPU 29% and GPU 62%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 32% (28-36%) and GPU 62% (53-72%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 9015 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the EPYC 9015 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 11% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-11%vsrecommended
+279%vsrecommended
+131%vsminimum
+1218%vsminimum
Yes, the EPYC 9015 paired with the GeForce RTX 4090 can run Genshin Impact smoothly up to 1080p achieving around 62 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 11% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Genshin Impact, upgrading the CPU would have the biggest impact on performance. The EPYC 9015 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
