Throne and Liberty
Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 102 FPS. At 1440p, all settings exceed 91 FPS. At 4K, all settings exceed 63 FPS.
The GeForce RTX 5090 is 189% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The EPYC 9135 is 196% above the recommended CPU (Core i5-11600K).
The EPYC 9135 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 5090 still has headroom.
Approximated average price on current market:
Combo price: $2795. At 1080p Ultra, this combo delivers 102 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.065 fps/$ | 0.056 fps/$ | 0.043 fps/$ | 0.036 fps/$ |
| 1440p | 0.054 fps/$ | 0.049 fps/$ | 0.037 fps/$ | 0.033 fps/$ |
| 4k | 0.038 fps/$ | 0.034 fps/$ | 0.025 fps/$ | 0.023 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the CPU.
The largest gap appears at 1080p Low, where the EPYC 9135 reaches about 181 FPS, while the GeForce RTX 5090 still has headroom up to roughly 247 FPS.
That means the EPYC 9135 is hitting its performance ceiling first, leaving a 27% gap versus the GeForce RTX 5090's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is CPU-limited in 12 out of 12 cases, with 0 GPU-limited and 0 balanced results.
Overall, this is a clearly CPU-bound combination in this game.
The EPYC 9135 is consistently the limiting part in this game, so upgrading the CPU is more likely to deliver a larger FPS gain than upgrading the GPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the EPYC 9135 with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 5090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 196% above and your GPU is 189% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+196%vsrecommended
+189%vsrecommended
+340%vsminimum
+534%vsminimum
Yes, the EPYC 9135 paired with the GeForce RTX 5090 can run Throne and Liberty smoothly up to 4k achieving around 63 FPS at Ultra quality. Your GPU is 189% above the recommended specs, and your CPU is 196% above the recommended requirements.
This CPU + GPU combo costs approximately $2,795 ($95 CPU + $2,700 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the EPYC 9375F is a great upgrade option for around $5,306 (Rank #5 for value).
For Throne and Liberty, upgrading the CPU would usually improve performance first. In the Performance Limiter Analysis, the EPYC 9135 is the side that most often caps the frame rate, while the GeForce RTX 5090 still has additional headroom in the tested presets. If you want to move closer to the current market ceiling, a stronger processor like Ryzen Threadripper PRO 9995WX for around $11,699 would be the clearest next step. The main bottleneck appears on the CPU side. The largest gap shows up at 1080p Low, where the CPU reaches about 181 FPS while the GPU still has headroom up to roughly 247 FPS. Across all tested settings, the distribution is 0/12 GPU-limited, 12/12 CPU-limited, and 0/12 balanced.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your EPYC 9135 and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
