A Source engine sandbox where performance depends entirely on the mods and contraptions you spawn. RAM errors are common on systems with only 4GB.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 329 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 284 FPS. At 4K, all settings exceed 205 FPS.
The GeForce RTX 4090 is 1051% above the recommended GPU (GeForce GTX 750) for Garry's Mod. The EPYC 9334 is 396% above the recommended CPU (Core i5).
The EPYC 9334 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $3459. At 1080p Ultra, this combo delivers 329 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.130 fps/$ | 0.108 fps/$ | 0.105 fps/$ | 0.095 fps/$ |
| 1440p | 0.106 fps/$ | 0.093 fps/$ | 0.090 fps/$ | 0.082 fps/$ |
| 4k | 0.085 fps/$ | 0.073 fps/$ | 0.067 fps/$ | 0.059 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the EPYC 9334 sets the ceiling at about 501 FPS, while the GeForce RTX 4090 could reach 785 FPS. In this scenario, the CPU limits the GPU potential by 36% (FPS gap: 284 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your EPYC 9334 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 36% | CPU Limits GPU 35% | CPU Limits GPU 35% | CPU Limits GPU 35% |
| 1440p (2K QHD) | CPU Limits GPU 32% | CPU Limits GPU 32% | CPU Limits GPU 32% | CPU Limits GPU 32% |
| 4K (Ultra HD) | CPU Limits GPU 31% | CPU Limits GPU 31% | CPU Limits GPU 31% | CPU Limits GPU 31% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 396% above and your GPU is 1051% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+396%vsrecommended
+1051%vsrecommended
+2086%vsminimum
+11449%vsminimum
Yes, the EPYC 9334 paired with the GeForce RTX 4090 can run Garry's Mod smoothly up to 4k achieving around 205 FPS at Ultra quality. Your GPU is 1051% above the recommended specs, and your CPU is 396% above the recommended requirements.
This CPU + GPU combo costs approximately $3459 ($1810 CPU + $1649 GPU). Your EPYC 9334 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the EPYC 9375F is a great upgrade option for around $5306 (Rank #5 for value).
Your EPYC 9334 is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Garry's Mod performance right now. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Garry's Mod does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Garry's Mod requires at minimum a Pentium 4 (CPU) and GeForce 6 series (GPU) with 4 GB RAM and 5 GB storage. For the recommended experience, you need a Core i5 and GeForce GTX 750 with 8 GB RAM. Your EPYC 9334 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Garry's Mod FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
